The Beekeeping Calendar: A Year in the Apiary
A honey bee colony runs on its own calendar, driven by daylight, temperature and forage rather than by the date on the wall. The beekeeper's job is to.
Late Winter: Stimulating Early Brood Rearing
The last weeks of winter are quietly dangerous for a honey bee colony. The queen begins to lay again, the cluster raises its core temperature to incubate.
Early Spring: First Inspections and Feeding
Early spring is the season of the first real look. After weeks of guessing from the outside you finally get to check the queen, the brood, the stores and.
Spring Buildup: Managing Explosive Growth
When the first reliable pollen arrives, a honey bee colony can go from a few thousand bees to tens of thousands in about two months. This explosive growth.
Swarm Season: Prevention and Management
Swarming is a colony's natural way to reproduce, and in much of the world it peaks in the weeks around the first major nectar flow. A swarm takes roughly.
Making Splits: Techniques and Timing
A split divides one strong colony into two or more, and it is the most useful single skill in managing an apiary. It gives you increase, redirects the.
Spring Feeding: Syrup Ratios and Methods
Feeding in spring can rescue a hungry colony, steer buildup, and bridge the gap between winter stores and the first big flow. It can also backfire.
Adding Supers: Timing and Configuration
Adding a super is simple in principle: put an empty box on the hive so the bees have somewhere to store nectar. In practice, the timing and configuration.
Queen Excluders: Pros, Cons, and Proper Use
A queen excluder is a grid with openings large enough for workers but too small for the queen's thorax. Placed between the brood boxes and the honey.
Early Summer: Peak Forage Management
Early summer is when the work of spring pays off. Colonies at peak population, bloom at full strength and long days combine to produce the main honey flow.
Honey Flow Management: When to Super
A honey flow is a short window, often only three to six weeks, when nectar is abundant and a strong colony can store more honey than it will eat in the.
Mid-Summer: Heat, Drought, and Dearth
Mid-summer can be the hardest stretch for both bees and beekeepers. After the main flow, many regions slide into a dearth: the heat builds, rain may fail.
Summer Feeding: When Nectar Stops
Bees do not usually need sugar in summer, until suddenly they do. A prolonged dearth, a drought, a heavy honey harvest or a split can leave colonies.
Late Summer: Preparing for Fall
Late summer looks quiet, but it is the most important season for the long-term survival of a colony. The bees that must survive winter, called winter.
Fall Inspections: What to Check
Fall inspections are different from spring ones. You are not looking for growth but for readiness: Does the colony have a good queen, enough bees, enough.
Fall Feeding: 2:1 Syrup and Fondant
Fall feeding is the beekeeper's last chance to put weight on a colony before the cold arrives. Heavy 2:1 sugar syrup is stored and capped quickly, and.
Winter Preparation: The Complete Checklist
Winter preparation is a chain of tasks that begins in midsummer and ends when the last mouse guard is fitted. Each task protects against a specific cause.
Winterizing Hives: Insulation and Ventilation
Winterizing a hive means shaping the physical environment so that a cluster of bees can survive months of cold, wind and damp with the least effort. The.
Winter Cluster Management: Don't Open the Hive
Once cold weather arrives, honey bees form a tight ball called the winter cluster, and the best management is often no management. The cluster's behaviour.
Emergency Winter Feeding: Candy Boards and Mountain Camp
Every beekeeper who keeps bees long enough opens a hive in January or February and finds a small cluster beside empty comb. Starvation is the most.
Spring Cleaning: Bottom Board Changes
By the time the first warm days arrive, a hive has spent months accumulating dead bees, wax cappings, mouse droppings, mould, propolis and moisture.
Reversing Brood Boxes: Pros and Cons
Reversing is a spring technique in which the beekeeper swaps the positions of two brood boxes, putting the lower box on top and the upper box on the.
Managing Strong vs. Weak Colonies
Walk any apiary in May and you will find colonies at every stage: a few boiling over with bees, most in the middle, and one or two struggling. The.
Combining Weak Colonies: Newspaper Method
Combining two colonies into one is among the most useful rescue tools in the apiary, and the newspaper method is the most reliable way to do it. A weak.
Equalizing Colonies in Spring
In every apiary, colonies develop at different speeds. By mid-spring, one hive may be bursting with brood while its neighbour struggles. Equalizing is the.
Nucleus Colonies: Management Throughout the Year
A nucleus colony, or nuc, is a small working colony: a laying queen, several frames of brood, bees, and stores in a box that holds typically four to five.
Double-Queen Systems: Advanced Management
A double-queen system runs two queens in one stacked colony, each laying in her own brood chamber, with the bees sharing a common set of honey supers..
Two-Queen Hives: Boosting Production
Two-queen hives are a production strategy built around one idea: more bees at the flow means more honey. Where the double-queen article describes how to.
Queen Banking: Holding Extra Queens
Queen banking is the practice of holding extra mated queens in a colony so that they are available when you need them. Every queen breeder and many.
Making Increase: Splits vs. Swarms vs. Packages
Making increase means adding colonies to your apiary, and there are three main routes: making splits from your own colonies, catching swarms, and buying.
Walk-Away Splits: Low-Intervention Method
A walk-away split is exactly what it sounds like: you divide a strong colony, give the queenless half what it needs to raise a new queen, close the box.
Nuc-Making: Timing and Technique
Making a nuc is the core skill of expansion, queen replacement and swarm control. A well-made nuc takes a few frames from a strong colony, adds a queen or.
Swarm Catching: Equipment and Technique
Catching a swarm is one of the most exciting things you will do as a beekeeper, and one of the easiest to get wrong. A swarm cluster hanging from a branch.
Swarm Traps: Placement and Monitoring
A swarm trap is a small, baited box hung in a tree or placed on a stand to attract scout bees looking for a new home. Done right, a row of traps produces.
Bait Hives: Attracting Free Bees
A bait hive is a prepared box put out to attract a wandering swarm, and the term is often used interchangeably with swarm trap. In practice the idea is a.
Cutouts: Removing Colonies from Structures
A cutout is the removal of an established honey bee colony from a wall, ceiling, chimney, tree or other structure by opening the cavity, taking out the.
Trapouts: Removing Bees Without Cutting
A trapout removes a colony from a structure without cutting open the wall. Instead of dismantling the cavity, you install a one-way cone over the main.
Moving Hives: Rules for Relocation
Moving a hive sounds easy until you do it wrong. Move bees too short a distance and the foragers return to the old spot; move them in the wrong season and.
Migratory Beekeeping: Basics and Logistics
Migratory beekeeping means hauling colonies from place to place to follow flowers and pollination contracts. It is the backbone of the commercial.
Pollination Contracts: What Beekeepers Should Know
A pollination contract is the written agreement between a beekeeper and a grower that sets what bees will be delivered, when, where and for how much..
Almond Pollination: The California Experience
California almonds are the largest managed pollination event in the world, and for many commercial beekeepers they are the single most important paycheck.
Blueberry Pollination: Hive Density and Timing
Blueberries are a demanding pollination crop, and getting the hive density and timing right is the difference between a full set and a disappointing.
Apple and Cherry Pollination
Apples and cherries are classic orchard pollination crops. They bloom in spring, they need insect visitation, and many varieties will not set fruit.
Cucurbit Pollination: Watermelon, Squash, Cucumbers
Cucurbits are the vine crops: watermelon, squash, pumpkins, cucumbers, cantaloupe and gourds. They are monoecious or nearly so, which means each plant.
Canola and Clover: Major Honey Flows
Canola and clover are two of the great honey flows of the northern half of the continent. Canola blooms in bright yellow fields across the northern plains.
Basswood and Black Locust: Premium Honey Flows
Basswood and black locust give two of the most prized honeys in North America: pale, delicate, mild, and sold at a premium. They are also two of the most.
Tupelo and Sourwood: Specialty Honeys
Tupelo and sourwood are the two honeys I have seen customers wait for. Tupelo honey, produced along southern river swamps, is famous for a buttery flavor.
Managing for Comb Honey Production
Comb honey is honey as the bees made it, sealed in fresh white wax and eaten whole. It is the most beautiful product a beekeeper can sell, and the hardest.
Cut Comb and Chunk Honey Production
Cut comb and chunk honey are the two easiest ways to sell comb honey, because the bees build in standard frames and you do the cutting. Cut comb is a.
Section Comb Honey: Old-School Production
Section comb honey is the oldest form of comb honey: small, square, basswood boxes filled by the bees with fresh white comb, capped and sold whole. It was.