A honey flow is a short window, often only three to six weeks, when nectar is abundant and a strong colony can store more honey than it will eat in the rest of the year. Everything you do in the weeks before the flow decides how much of it you capture. Colonies must be at peak population on the first day of the flow, supers must be on ahead of demand, and swarm impulses must be defused. This article explains how to read a flow, when to super, how to manage space and moisture during the flow, and how to wind it down.
Population timing is everything
The foragers working the flow were laid as eggs about five to six weeks earlier. A worker spends about three weeks in the hive and then forages for roughly the final two to three weeks of a summer life. That means a colony must be building its brood nest to the maximum during the spring bloom that precedes the flow, not once the flow begins. Beekeepers who feed and manage well in spring often triple the crop of those who start paying attention in June.
Find out when your main flow arrives by observing bloom and weight gain across several seasons. Beginners can ask local clubs and read Understanding Local Nectar Flows. Then count backwards: if basswood opens in early July, your colonies need to be strong by mid-June, which means a vigorous buildup in April and May. The path is described in Spring Buildup: Managing Explosive Growth and Equalizing Colonies in Spring.
Supering ahead of the flow
Add supers before the flow starts, not after. A good rule is to put the first super on when the main nectar plants begin to bloom, and the second when the first is about half drawn or filled. A strong colony in a good flow can fill a medium super in four to seven days. Being a week late can mean lost honey and a colony in swarm mode.
Because drawn comb allows bees to store nectar immediately, supers of drawn comb are worth much more than foundation. If you have a mix, place drawn frames in the centre where bees will work them first. Our guide to Adding Supers: Timing and Configuration covers configuration options, including top and bottom supering, and Queen Excluders: Pros, Cons, and Proper Use discusses when an excluder helps or hinders.
Reading the signs on a flow day
You can tell a flow is on from several clues. Bees fly early and late, there is traffic at the entrance, and in the evening you can hear a loud roar as workers fan to evaporate moisture from the nectar. Fresh white wax appears on frame tops and in the supers. Scale hives register gains of a few pounds per day, sometimes more than ten in a strong flow. Hive Scales: Monitoring Weight are an excellent tool for tracking the flow.
Conversely, a slackening flow shows as quieter hives, less wax building, robbing attempts at the edges of the yard, and falling weight. When the nectar stops, honey in supers will not finish ripening as fast, and you should stop adding supers. Keep track of the dates and weights in your records for future years.
Keeping the colony from swarming
Peak colony strength can push bees into swarm mode, even in a flow. Provide ventilation, keep the brood nest open, and continue checking for queen cells every week or ten days through the early flow. If the brood area is being squeezed by incoming nectar, move frames of honey up and replace them with empty drawn comb. See Swarm Season: Prevention and Management for the full prevention program.
Splitting during or just before a flow can reduce the honey crop of the parent, so many producers make splits earlier or later. If you want both honey and increase, designate some colonies as honey producers and others as nucleus and split sources. Managing for Comb Honey Production describes how specialised management can protect the honey crop.
Ventilation and moisture
Nectar is typically 70-80% water, and bees must evaporate it down to around 18% before capping. They do this by spreading nectar in thin films and fanning. Good airflow through the hive speeds this up, so keep entrances open, use screened bottom boards, and consider an upper entrance or ventilated inner cover. In humid regions, ripening can take longer, and the risk of high-moisture honey is higher.
Harvest only frames that are mostly capped or test moisture with a refractometer. Honey above about 18.6% moisture can ferment in storage, and most beekeepers aim for 18% or lower. See Honey Moisture: Why 18% Matters and Refractometers: Measuring Honey Moisture for measurement. Capped honey is usually safe, but frames with partial capping need testing. If in doubt, leave the frames on longer or dry them in a warm room with a dehumidifier before extraction.
Managing yard-level issues
During a flow the apiary is busy, and other hazards appear. Keep a water source near the yard so bees do not visit neighbours' pools. Heavy supers are risky for stands and for your back, so use sturdy stands and proper lifting technique. Avoid working during the heat of the day, and follow the safety guidance in Safety First: 4-H Beekeeping Rules and Parental Roles and Protective Gear: Suit, Jacket, or Veil?.
Check for brood diseases and mites in the weeks before the flow, since treatments cannot usually be applied with supers on. Mite treatment decisions must account for label restrictions on honey supers. For overall pest management, see Integrated Pest Management for Varroa. If foulbrood shows up, act quickly, because honey and equipment can spread spores.
Winding down the flow
As the flow tapers, stop adding supers. Consolidate partly filled supers by shifting them to the middle of the stack so the bees can finish and cap. Start planning harvest and consider whether you will leave enough honey for the colony. Many beekeepers in the north leave 60 pounds or more of honey for winter in the brood boxes and take only surplus from supers.
As the last of the flow fades, reduce entrances to deter robbers, and be ready to feed if a dearth follows. Read Mid-Summer: Heat, Drought, and Dearth and When to Pull Honey Supers for what comes next. Record the final yields per colony, so you can see which colonies and locations perform best.
A flow-season checklist
- Count back from the flow date to ensure the colony peaks in time.
- Add supers before the first nectar and stay ahead of the bees.
- Use drawn comb in the centre of each super.
- Keep ventilation open and watch weight each week.
- Test moisture before extraction.
- Stop supering when the flow tapers and consolidate.
- Leave adequate stores for the colony before you harvest.
FAQ
How long does a typical honey flow last?
Many main flows last three to six weeks, though this varies widely by region and weather. Minor flows may be shorter and less reliable.
When should I add the second super?
When the first super is about half to two-thirds full or drawn. In a strong flow, that can be within a week of adding the first.
Can I feed syrup during a honey flow?
No. Syrup can end up in the supers and spoil your honey crop. Remove feeders and supers if you must feed, and stop feeding once the flow starts.