Beekeeping Directory

Home › Guides › Hive Management by Season › Moving Hives: Rules for Relocation

Hive Management by Season

Moving Hives: Rules for Relocation

Moving a hive sounds easy until you do it wrong. Move bees too short a distance and the foragers return to the old spot; move them in the wrong season and you lose the colony to chill or heat; move them across a state line without paperwork and you may run into a quarantine officer. In thirty years I have moved hives across the yard, across the county and across the continent, and the rules I follow are simple. This article covers the two-feet-or-two-miles rule, preparation, lifting and securing, travel, legal issues and what to do when you arrive.

The Two-Feet or Two-Miles Rule

Foragers learn the location of their hive precisely. If you move a colony a few feet, bees may still find it. If you move it a few yards, many foragers will fly to the old spot and cluster in confusion. If you move it a few miles, the bees reorient on the first flight.

Beekeepers often say two feet or two miles. Move less than two feet at a time and the bees adapt. Move at least two miles and they will not return. In between, you have trouble. If you must move a hive a short distance, either do it in small steps over days, or move it away for several weeks and then back, or put a barrier such as a branch or a board in front of the entrance so bees reorient. Local conditions vary; distances of three miles or more are safer. See how bees regulate hive temperature for why heat matters in transit.

When to Move

The best times are late fall or early spring, when bees are clustered and flying little. Winter moves, if the temperature is below freezing and the colony is tightly clustered, are often easiest. Summer moves are hardest because of heat and a full box of foragers and brood.

If you must move in summer, move at night or early morning when bees are home, and provide ventilation. Avoid moves during or just after a nectar flow when supers are heavy. Check the weather: rain, wind and heat are all hazards. Avoid moving a colony that is queenless or very weak because the stress can finish it. Moves during a honey flow also risk breaking comb in heavy supers.

Preparing the Hive

Check that the colony is sound and healthy. Look at the equipment: boxes should be in good condition with no cracks or loose joints. Close up gaps with staples, hive straps or screws. Remove or secure frames with spacers if you are traveling a long way, and replace missing frames with dummy boards.

Plan to move the colony after dark so most foragers are in the hive. Reduce the entrance and, on the day, close it with screen or foam, depending on the length of travel. Strap the boxes together with ratchet straps or hive staples. Put the lid on securely, and use a screened bottom board or a screened inner cover for ventilation on long trips. Remove honey supers if possible, or secure them with strapping. If you have a stand, leave it behind.

Lifting and Loading

Use proper technique. A two-box hive full of bees and honey can weigh over 100 pounds. A hive dolly or a hive lift saves backs. Work with a partner. Lift with your legs and keep the load close. Move slowly and steadily. Bees are calmest at night, but you may use a headlamp with a red filter so they are less likely to fly toward the light.

Load the hives in a truck or trailer so they cannot shift, and strap them tightly to the bed. Beekeepers argue about whether frames should run with or across the direction of travel; what matters more is smooth driving and tight strapping. Cover the load with a net to keep stray bees in. Commercial hauling practice is covered in migratory beekeeping. Keep a smoker and a veil handy.

The Drive

Drive slowly and smoothly. Avoid sudden stops and sharp turns. In hot weather, travel at night or early in the morning, and do not stop for long in the sun. If you must stop, park in the shade, and leave windows on the cab open if you carry bees on the seat. Check the load often. If bees escape, stop in a safe place and fix the leak.

Heat is the main danger on long trips. A closed colony in a hot truck can overheat and die. Provide ventilation, and consider a water mist. For very long trips, commercial beekeepers use screened covers, nets and water. Keep the colony from getting too cold in winter. Have emergency equipment: tape, a staple gun, straps and a spare veil. Plan stops for fuel and food in places where you can park safely and away from people. See hive scales for gauging weight.

Moving bees across state lines or county lines may require an inspection certificate, a permit or a notification. Rules differ widely and change. Some states require that bees be inspected for disease before entering, and some require a permit for migratory colonies. Check with your state apiarist and the destination state's agriculture department before you move.

Registration of apiaries is another issue. If you move a hive to a new location, you may need to update your registration. Check city and county zoning rules for hive placement, setbacks and numbers. See legal requirements for backyard beekeeping and the state-by-state directory. When in doubt, call before you go.

Settling In at the New Site

Set the hive on a level stand in its final spot, facing the right direction. Leave the entrance closed until the bees have calmed, then open it at dusk or early morning. Remove straps and screens carefully. Put a branch or board in front of the entrance so bees see a new landscape and reorient.

Check the hive after a few days. Make sure the bees are flying and there is no damage. Provide water if needed. If you moved a long way, bees may be disoriented for a few days and you may see some drifting. Check for robbing, as the move may have caused stress. Give the colony a week before major inspection. Review hive stands for good placement.

Common Mistakes

  • Moving a hive a few yards and losing the foragers.
  • Moving without securing frames or boxes.
  • Traveling in heat without ventilation.
  • Opening a hive in transit.
  • Moving without checking legal requirements.
  • Moving a weak or queenless colony.
  • Setting hives down in a hurry at the new site.

Planning and patience prevent most problems. Test your strapping and your route before the big day, and practice with a single hive.

FAQ

How far must I move a hive so foragers do not return?

Move it at least two miles, ideally three or more, or move it in steps of a couple of feet at a time.

Should I close the entrance when moving a hive?

Yes, move at night and close the entrance with screen or foam so bees can breathe, but make sure the hive has ventilation.

Do I need a permit to move bees to another state?

Often, yes; requirements vary, so contact your state apiarist and the destination state before you move.

Keep learning

Browse all 500 guides →