Beekeeping Directory

Home › Guides › Hive Management by Season › Managing for Comb Honey Production

Hive Management by Season

Managing for Comb Honey Production

Comb honey is honey as the bees made it, sealed in fresh white wax and eaten whole. It is the most beautiful product a beekeeper can sell, and the hardest to produce. I have produced section, cut and chunk comb for thirty years, and the lesson is that comb honey demands a different management style from extracted honey. You manage the colony for crowding, for a strong flow, and for white wax, not for the biggest crop. This article covers colony selection, the flow, equipment, swarming, supering, timing the harvest and handling the combs afterward. See comb honey production for an overview and section comb honey and cut comb and chunk honey production for the formats.

Why Comb Honey Is Different

Bees must make wax to build comb, and wax production uses a lot of energy and honey. Estimates often cited by beekeepers suggest bees consume several pounds of honey to produce a pound of wax, so comb honey yields fewer total pounds than extracted honey from the same colony. In exchange, you sell a premium product.

Success depends on two things: a strong, steady flow and a crowded colony. Without a flow, bees will not draw clean white comb. Without crowding, they will not move into the supers. A colony ready to swarm often draws comb beautifully, which is why managing comb honey and managing swarming are linked. Read swarm season before you start.

Choosing the Right Colonies

Choose strong, young-queen colonies with good temperament and a low tendency to swarm. Bees that cap honey white, with an air space under the capping, are ideal. Dark, wet or travel-stained cappings lower quality. Some stocks cap better than others, so select from colonies that produce attractive comb and breed from them. See breeding for honey production for the reasoning.

Italian and Carniolan stock both have supporters among comb honey producers. Carniolans build quickly in spring but tend to swarm more; some Italians cap whiter. Evaluate your own bees. Replace old queens. A queen in her first or second year gives a stronger brood nest and less swarming impulse. Make sure the colony is healthy, with low mites and no brood disease.

Equipment Choices

Comb honey can be produced in section boxes, round plastic rings, Hogan frames or thin-foundation frames in shallow supers. Cut comb and chunk honey use shallow frames with thin or no foundation. Use only clean, new foundation made for comb honey, which is thin and soft so that bees draw it and the wax is tender to eat.

Shallow supers are easier to handle. Many beekeepers use a queen excluder to keep brood out of comb supers, though some prefer none, since excluders can slow bees' entry. Have a wasp-proof, bee-proof place to store finished comb. Plan packaging: clamshells, wrap, or labeled containers. See queen excluders and Langstroth hive.

Timing the Flow and the Supers

Put comb supers on just as the main flow begins, not before and not long after. If you add them too early, bees ignore them or fill them with brood. Too late, and they will have already filled the brood nest with nectar and swarm. A standard cue is the start of white wax appearing on the tops of frames and the first main bloom.

Add one super at a time. When the first is about half filled, add a second below it, so partly drawn comb moves up, or place the new one underneath. Bait sections or drawn comb in the center can lure bees upward. Keep supers warm and well-ventilated. Check frequently, because comb honey takes only days to go from empty to capped in a heavy flow. See adding supers and honey flow management.

Swarm Control

Crowding encourages bees to draw comb, but too much crowding triggers swarming. The usual approach is to give just enough room to keep bees working, while using swarm control such as reversing brood boxes, removing frames of brood, or making a split. A colony that has already started queen cells will probably not produce good comb honey, and may leave.

Check the brood nest weekly in swarm season, and manage space. If you find cells, take action: split the colony, requeen, or remove the queen and let the colony raise a new one. Make a plan before the flow, so you can act quickly. Compare making splits and reproductive swarming.

Keeping Wax White

White cappings are a mark of quality. They are made when bees seal the honey with new wax, leaving an air space beneath. Travel stain, dark comb or propolis can darken cappings. Remove the comb from the hive promptly after capping, because leaving it on the hive longer increases travel stain from bees walking on it.

Use clean supers and avoid putting comb honey supers on over dirty brood. Good ventilation reduces moisture. If the flow slows, take off the supers rather than letting bees chew the cappings. A queen excluder reduces pollen in the comb, which would otherwise discolor it. Keep smoke use gentle, because heavy smoke can stain cappings.

Harvest and Handling

Remove supers when most comb is fully capped. Use a bee escape or brush bees off gently. Check the comb for uncapped cells or pollen. Trim and grade the comb, and keep it clean. Handle with care, since the comb is fragile and wax breaks easily.

Wax moth and small hive beetle can ruin comb honey in storage. A common precaution is to freeze the finished combs for a few days before packaging, then keep them in a cool, sealed space. See wax moth in comb honey and small hive beetle. Check moisture; see honey moisture before you sell.

Troubleshooting Common Problems

When comb honey goes wrong, the cause is usually one of a handful of things, and you can often work backward from the symptom.

  • Bees will not enter the supers: the flow is weak, the colony is not crowded, or the supers are too cold. Move a half-drawn frame to the center, or reduce the brood space.
  • Combs are drawn but unfilled: the flow ended early. Leave the supers on a short time more, or sell the partial combs as chunk honey.
  • Cappings look wet or watery: the honey is high in moisture or the super was left over a damp colony. Judge by weight and ripeness.
  • Cappings are dark or stained: supers stayed on too long, or the bees were walking over them in a dearth. Pull promptly.
  • Pollen in the combs: the queen excluder was missing or the brood nest was too close. Use an excluder and a honey-only super.
  • Swarm cells appear: stop, split, and accept a smaller crop from that colony.

Keep a log of what each colony did. Over several seasons the pattern shows which stock, which equipment and which timing produce the best combs in your location.

Marketing and Judging

Comb honey sells to customers who value appearance. Present it in clear packaging, with a label that explains the product. Price it higher than extracted honey, to reflect the extra work and lower yields. Competitive exhibitors learn what judges look for. See comb honey judging standards for what makes a quality comb.

FAQ

Why is comb honey harder to produce than extracted honey?

It needs a strong, steady flow and a crowded colony, and bees must make wax, which reduces total yield and raises the risk of swarming.

Do I need a queen excluder for comb honey?

Many producers use one to keep brood and pollen out of the combs, though some find it slows bees' movement into the supers.

How do I prevent wax moth in finished comb?

Freeze the comb for a few days after harvest, then store it in a cool, sealed container.

Keep learning

Browse all 500 guides →