Beekeeping Directory

Home › Guides › Hive Management by Season › Walk-Away Splits: Low-Intervention Method

Hive Management by Season

Walk-Away Splits: Low-Intervention Method

A walk-away split is exactly what it sounds like: you divide a strong colony, give the queenless half what it needs to raise a new queen, close the box and walk away for a few weeks. No grafting, no purchased queens, no queen cells to babysit. I have made hundreds of these over the years, and when conditions are right they are the least labor for the most new colonies. They also fail more often than any other split method if you ignore timing, drone supply or the presence of young larvae. This article explains how to set one up, when to make it, how to check it and what to do when it fails.

What a Walk-Away Split Is

In a walk-away split you remove a portion of a colony, typically brood, bees and food, and place it in a new box without a queen. The bees notice within hours that they are queenless and begin emergency queen rearing, selecting very young worker larvae and drawing out their cells. About sixteen days after the larvae are chosen, a virgin queen emerges. She then takes mating flights, usually between five and ten days later, and begins laying a week or so after that. Total time from split to eggs is roughly four to five weeks.

The key to success is that the split contains eggs or very young larvae, because workers can only convert larvae under about three days old into queens. Without them, the bees cannot make a queen and the unit becomes hopelessly queenless. For other split methods that include a queen, see making splits and nuc-making.

When to Make Them

Timing is everything. The split needs a good supply of drones in the area, which means mid-spring through summer in most regions, after drone brood has been raised and matured. Choose a warm period with reliable weather, because virgin queens need sunny days to mate. A cold, wet spell during the mating window can doom the split.

A practical rule: make walk-away splits when the colony is strong, drones are flying, and you still have at least eight weeks of good weather ahead. In the north, that often means late spring or early summer. In the south, splits can begin earlier and continue longer. Avoid making splits during a dearth, when the bees will not feed a developing queen well and robbing risks rise. See queen mating biology for how mating works and why weather matters.

Choosing the Frames

Take frames from a strong colony with good temperament, strong brood pattern and signs of the traits you like. A well-balanced split includes:

  • Two or three frames of brood, with a mix of capped and open brood and some eggs.
  • One or two frames of honey and pollen.
  • One or two frames of drawn comb or foundation for room.
  • Enough bees, shaken from a couple of extra frames, to cover the brood.

Do not take the queen. Before you move frames, find her and leave her in the parent colony, or place her in a cage and set her aside. Check that every frame you move is free of her. Marked queens make this much easier; see queen marking and finding the queen. Avoid frames with swarm or supersedure cells that you do not want to use unless you actually want the colony to use them.

Setting Up the New Box

Place the new box in a different location, at least a few feet away, or better, several miles away. If you leave the split on the same stand, the foragers will return to the old location and the split will lose its field force. A nearby split can be moved with a strong shake of foraging bees back to the parent, so many beekeepers move the split to another yard or at least to the far side of the same yard with a screen or grass blocking the entrance.

Reduce the entrance to a small opening. Provide feed if necessary, such as one-to-one syrup in a division board feeder, because the split will lose its foragers. A tight cluster of nurse bees can feed larvae but cannot gather stores. Leave the split alone for at least a week. Opening early can disrupt the bees as they select larvae and build cells.

The Waiting Game

Day by day, the process unfolds. On the first day, the bees realize they are queenless. By day three or four, you can find queen cells being drawn out on the comb. Cells are capped by about day eight to ten after the larvae were selected. A virgin queen emerges by about day sixteen, and she is typically mated and laying by day twenty-eight to thirty-five.

Resist the urge to check too soon. A good checkpoint is around day ten to confirm queen cells are capped, and another at four weeks for eggs. In between, only peek at the entrance. If the colony looks calm, with bees coming and going, it is probably fine. Understanding queen cells explains what you are looking at and how to tell good cells from poor ones.

Checking for Success

At about four weeks, open the box and look for eggs, ideally one per cell standing upright. Eggs mean the queen is mated and laying. If you see a laying queen and a compact brood pattern, the split succeeded. If you see no eggs, no queen and no queen cells, the split failed and you must act quickly. A split with drone-laying workers or a failing queen should be combined back to a queenright colony rather than coaxed along.

A nice feature of walk-away splits is that the new queen is bred from the stock of the parent, adapted to your location. The quality depends on the queen cell selection, though. Emergency queens are raised from larvae chosen in a hurry and often less well fed than cells from a good cell builder, so expect more variation than from grafted queens. Evaluating queen performance helps you decide which to keep.

Common Failures

Walk-away splits fail for predictable reasons. The bees may lack eggs or young larvae, so no queen can be made. The split may be too small to maintain the temperature of the brood nest, which should stay near 93 to 95 degrees Fahrenheit. The virgin queen may be lost on her mating flight to a bird, bad weather or a wrong entrance. Or laying workers may take over if the split stays queenless too long.

  • No eggs or young larvae at the start.
  • Split too weak or too small.
  • Foragers drifting back to the parent hive.
  • Poor weather or drone shortage at mating time.
  • Robbing during a dearth.
  • Mouse or pest invasion of an unguarded box.

If you suspect failure, give the split a frame of eggs from another colony. If the bees start new queen cells, you have a second chance. If they do not, combine with another colony using the newspaper method, described in combining weak colonies.

Improving the Odds

Several small steps improve the success rate. Add a frame of open brood from a second strong colony to give the bees more larvae to choose from. Shake nurse bees into the split to ensure there are plenty of them. Keep the split fed and the entrance reduced. Place the split in a sunny, sheltered spot with a good flight line.

Another improvement is to let the split build a queen cell from a selected, grafted or purchased cell rather than relying on emergency cells. A ripe cell added a day after the split is made gives you a known genetic source and speeds up the process by several days. See queen cell builders for related ideas.

Walk-Away Versus Other Methods

Walk-away splits are cheap and simple, but they are slow and uncertain. A purchased mated queen introduced to a split gives a laying queen within days, but costs money. A ripe queen cell gets you a queen in about a week and is a good middle path. The right choice depends on your goals and your tolerance for a failed unit.

If you want a few extra hives and have time, walk-away is fine. If you need reliable production colonies, or are splitting in the middle of the season when each week matters, buy a queen. Many keepers use a mix. Read making increase for a wider comparison of expansion methods.

FAQ

How long does a walk-away split take to start laying?

Usually about four to five weeks from the day you make the split, depending on weather and mating success.

Do I need to feed a walk-away split?

Often yes, because the split loses foragers, so light syrup feeding helps until the new queen is laying and foragers return.

What if I find no eggs after five weeks?

Check for a virgin queen or queen cells; if none, add a frame of eggs from another colony or combine the split with a queenright hive.

Keep learning

Browse all 500 guides →