Beekeeping Directory

Home › Guides › Pests, Diseases & Health › Small Hive Beetle (SHB): Identification and Control

Pests, Diseases & Health

Small Hive Beetle (SHB): Identification and Control

The small hive beetle, Aethina tumida, is a scavenger native to sub-Saharan Africa that became a serious pest in the United States after it was detected in the late 1990s. In strong colonies it is usually a nuisance. In weak colonies, or in honey houses with wet, stored supers, it can ruin a season's work through larvae that tunnel through comb, defecate in honey and cause it to ferment. This article covers identification, the beetle's life cycle, how colonies defend themselves, and an integrated control plan.

Identifying the adult beetle and larva

Adult small hive beetles are small, dark brown to black, and about a quarter the size of a bee. They are roughly oval, with a hard shell and clubbed antennae, and they move quickly across the comb, running into crevices when you lift a lid. The wing covers are shorter than the abdomen, leaving the tip exposed.

The larvae are cream-colored, up to about a half inch long when mature, with three pairs of short legs near the head and rows of small spines along the back. They are easy to confuse with wax moth larvae. The key difference is the legs: wax moth larvae have prolegs along the abdomen and spin silk webbing, while beetle larvae do not spin webbing and have spines.

Beetles hide in places where bees cannot easily reach them, such as corners of the hive body, under the inner cover, and in the dead space of the bottom board. Check these when you open a hive. Our article on Wax Moth: Greater and Lesser shows the differences in detail.

Life cycle and why it matters

Adult females lay clusters of eggs in cracks and crevices or on comb, particularly where brood or pollen is present. Eggs hatch in a few days, and larvae feed on pollen, honey and brood, then leave the hive in a wandering stage to pupate in soil. Adults emerge a few weeks later and can fly several miles to locate colonies.

Warm, moist soils favor pupation, which is why beetle pressure is strongest in the Southeast and in areas with sandy, well-drained or damp ground in summer. Very cold or very dry conditions suppress development, but beetles can survive winter inside clusters, so their presence in northern states is not unusual.

Understanding the cycle gives you two control points: the hive, where adults and larvae feed, and the soil beneath and around the hive, where larvae pupate. Strategies that attack only one of these tend to give partial results.

How colonies defend themselves

Healthy colonies are quite good at managing beetles. Bees chase adults, corral them in small propolis prisons, and guard them, while feeding them through the bars so that they stay alive and do not release alarm signals. Italian and Carniolan stocks differ in how they respond, and some lines show stronger hygienic behavior toward beetle eggs and larvae.

Colonies lose this upper hand when they are queenless, small, diseased, or crowded into more space than they can patrol. Empty comb is an invitation, because the bees cannot cover it. A colony that has dwindled after Varroa damage or Nosema can be overwhelmed within weeks.

The practical rule is to keep colonies strong, reduce the extra space, and avoid leaving large areas of comb that bees cannot cover. See Social Immunity: Propolis, Grooming, and Sanitation and Hygienic Behavior: The Genetic Basis for the broader picture.

Recognizing an infestation

Early signs are a few beetles seen running on the comb or under the lid. The warning signs are many beetles clustered at the top or back, slimy honey, a smell like rotting oranges, and comb with trails of larvae. Honey fermented by beetle larvae foams and runs out of cells, and bees may abscond from an infested hive.

Inspect at least every two weeks during the warm season. Lift the inner cover and look quickly, because adults will flee from light. Check the bottom board and any traps. A rough guideline is that a handful of beetles in a strong colony is tolerable, while dozens, or any sign of larvae, calls for action.

Use consistent monitoring notes, such as number of beetles per hive and whether larvae are present, so you can see trends. When you find larvae in a frame, remove it and deal with it away from the apiary.

Integrated control in the hive

Control starts with colony management, not chemicals.

  • Keep colonies strong. Combine weak colonies instead of nursing them through the season; see Combining Weak Colonies: Newspaper Method.
  • Reduce space. Remove unneeded boxes and keep the brood nest compact.
  • Trap adults. In-hive traps can capture beetles. Our guide to SHB Traps: In-Hive and Ground compares designs and placement.
  • Use screened bottom boards with care. Open screened boards allow some beetles to drop through, but they are not a complete solution. See Bottom Boards: Solid vs. Screened.
  • Extract promptly. Supers with honey should not sit in the honey house for long; extract within a few days.

Only use registered products labeled for small hive beetle, and follow label directions and local laws exactly. Never apply pesticides meant for other purposes in or near a hive.

Soil and apiary-level control

Because larvae pupate in soil, ground management matters. Choose sunny, well-drained sites. Avoid sites that stay damp or shaded, since beetle larvae thrive in moist soil. Keep grass trimmed, and keep the area under the hive clear.

Some beekeepers use registered soil treatments under hives, applied according to the label, where local rules permit. Others use ground traps or barrier systems that capture wandering larvae. Check with your state apiarist or extension office about what is permitted where you live.

Do not dump infested comb in a pile near the apiary, because larvae will complete development in the ground. Seal infested frames in bags and freeze them or dispose of them by an approved method. For apiary siting principles, see Siting Your Apiary: Sun, Wind, Water, and Neighbors.

Protecting stored equipment and honey

Honey houses are common sites of beetle outbreaks. Honey supers stored wet, or with unextracted honey, can host beetles that lay eggs in them. Larvae then ruin honey stored in the supers.

To protect your harvest:

  1. Extract within a few days of pulling supers.
  2. Keep the extraction room cool and dry. Moisture helps beetles.
  3. Store extracted supers in a cool, dry place where bees cannot reach them. Freezing combs for 24 hours or more kills all stages, according to common recommendations.
  4. Keep honey in sealed containers, and clean up spills.

Compare the techniques used against wax moths in Wax Moth Control in Storage; many apply to both pests.

Reporting and local rules

Small hive beetle is established in many states, so reporting is usually not required, but regulations vary. Some states regulate the movement of colonies, packages or used equipment, particularly where beetle is still absent. Ask your state apiarist or extension office. Our state-by-state directory links to state pages.

If you buy used equipment, treat it as if it carries beetles: inspect, freeze or otherwise clean it, and quarantine it away from your apiary for a time. Good habits about sanitation are in Apiary Hygiene: Equipment Cleaning and Disinfection.

Keep a record of beetle counts, and share it with your local beekeeping club. Pooled observations help the community learn how the beetle behaves in your area.

FAQ

Are small hive beetles dangerous to a strong colony?

Generally not. Strong colonies patrol, trap and contain beetles. Problems occur in weak, queenless or crowded colonies and in wet stored honey supers.

How can I tell beetle larvae from wax moth larvae?

Beetle larvae have three pairs of legs near the head and spines on the back, and they do not produce webbing. Wax moth larvae have prolegs along the abdomen and spin silk.

Does freezing comb kill small hive beetle?

Yes. Freezing frames at a deep freeze temperature for at least a day is widely recommended to kill all life stages. Allow the frames to warm in a sealed bag before use to avoid condensation.

Keep learning

Browse all 500 guides →