Beekeeping Directory

Home › Guides › Pests, Diseases & Health › Apiary Hygiene: Equipment Cleaning and Disinfection

Pests, Diseases & Health

Apiary Hygiene: Equipment Cleaning and Disinfection

Apiary hygiene is the quiet foundation of disease prevention. You cannot see most bee pathogens, but you can reduce how far they travel. Hive tools, gloves, frames, boxes, extractors and even your veil can carry spores and microbes from one colony to the next. A few consistent habits cut that risk, and a few cleaning methods work better than others. This article covers hive tool and glove practices, how to clean and disinfect equipment, methods such as scorching and washing, what you should not do with chemicals, and how to build a simple hygiene routine for your yard.

Hygiene principles

Think in terms of routes and levels of risk. A disease moves when something carries it between colonies. Common routes include your hands and tools, frames or comb moved between hives, robbing, drifting, shared equipment, and honey fed back to bees.

Levels of risk vary. A colony with no disease history poses little risk. A colony that died of an unknown cause poses more. A colony with American foulbrood poses the highest risk, because spores persist for decades. Match your sanitation to the risk.

The basic principles are:

  1. Work from healthy to suspect colonies.
  2. Do not exchange comb or equipment between colonies without checking health.
  3. Clean tools between yards and after any suspect colony.
  4. Remove and handle dead-outs carefully.
  5. Keep records, so you know which equipment came from which colony.

Understanding bees' own defenses, such as propolis use and grooming, gives context; see Social Immunity: Propolis, Grooming, and Sanitation.

Tools, gloves and clothing

Your hive tool is a vector. Scrape it clean after every inspection, and wipe or flame it between colonies if you suspect disease. A simple practice is to carry two tools and swap them, or to carry a small container of washing solution, such as a hot soapy water bucket.

Gloves are another route. Leather gloves are hard to clean and absorb propolis, honey and microbes. Nitrile gloves can be changed between colonies, which is a good practice if you suspect disease. See Gloves: Leather, Nitrile, or None? for pros and cons. Wash gloves and suits regularly, following the manufacturer's instructions.

Other items to clean include smoker nozzles, brushes, frame grips, and the cloth or mat on which you set frames. Keep a bucket of soapy water in the apiary, and wash your hands between colonies when working with suspect hives. Change or wash your veil and suit regularly. Do not wear the same clothes into several yards without washing if you handle diseased colonies.

Cleaning woodenware

Boxes, bottom boards and covers collect propolis, wax, and debris. Cleaning removes organic matter, which is a necessary first step, because disinfectants work poorly on dirty surfaces.

Basic steps:

  • Scrape boxes and frames with a hive tool or scraper to remove burr comb and propolis.
  • Wash with hot water and a detergent where practical, then rinse and dry.
  • Scorch the interior of boxes with a propane torch, charring the surface lightly, as is common practice for woodenware from diseased colonies. Take fire safety seriously, working outdoors on bare ground, away from dry grass and buildings, with a fire extinguisher or water nearby.
  • Dry fully before reuse.

Wood treated with preservatives or paint should not be scorched, because fumes may be hazardous. See Painting and Preserving Bee Equipment. For boxes from colonies with AFB, regulations may require burning or irradiation of equipment, not reuse. See AFB Eradication: Burning and Irradiation and follow your inspector's instructions.

Frames, comb and plastic

Comb is harder to clean than wood. Wax and honey absorb contaminants, and spores can persist in them. In many cases the safest approach is to remove old or suspect comb, and to render it, rather than trying to disinfect it.

Plastic frames and foundation are easier to scrub, but they hold wax and propolis tightly. Scrape, wash with hot water and detergent, and rinse thoroughly. Dry them before use. Some beekeepers use washing solutions of washing soda or similar cleaners. Use only products as labeled and follow safety instructions, since these can be caustic and require gloves and eye protection.

Do not use household bleach or other chemicals on equipment that will contact bees unless clearly advised by a regulatory authority, since residues may harm bees. When unsure, ask your state apiarist or extension office about approved methods in your area. For comb replacement schedules, see Comb Rotation: Why and When and Old Comb: Contaminant Accumulation.

Extractors, honey house and storage

Extraction equipment contacts honey, which can carry spores from many colonies. After extraction, wash extractors, buckets, uncapping tools and filters with hot water, and rinse well. Drain and dry everything. Do not leave wet equipment, since moisture encourages mold and attracts pests.

Keep the honey house closed to bees, and store stacked supers dry and sealed, as in Wax Moth Control in Storage. For small hive beetle control, extract promptly and keep the room cool. See Small Hive Beetle (SHB): Identification and Control. For general storage, see Storage: Keeping Equipment Clean and Dry.

Never feed honey from unknown sources to your bees, because spores can be present, even in honey that looks fine. Use sugar syrup or honey from your own healthy colonies. Do not use honey from the supermarket as bee feed.

Dead-outs, swarms and used equipment

When a colony dies, close the entrance to prevent robbing and investigate. Look for signs of disease, such as AFB scale or mold, and note the cause; see Necropsy: What to Look for in a Dead Colony. If you suspect disease, do not reuse comb or move it to other hives. Contact your inspector.

When you buy used equipment, treat it as a risk. Ask for history, inspect it, and clean or scorch boxes, and consider removing old comb. Equipment from unknown sources can introduce AFB, wax moths and beetles. Quarantine used items away from your apiary until you are sure they are safe.

Caught swarms and cutouts are also unknown. Place them on new foundation or clean equipment, and watch for disease for the first few months. See Swarm Catching: Equipment and Technique for handling.

Building a routine

A simple routine makes hygiene automatic.

StepWhen
Scrape and wipe hive toolAfter each colony
Change or wash glovesBetween suspect colonies and yards
Wash suit and veilRegularly, and after diseased colonies
Clean and scorch woodenwareWhen reusing boxes from dead-outs
Replace old combOn a schedule
Clean extracting equipmentAfter each use
Keep yard recordsAlways

Add notes for each colony, such as brood patterns, disease signs, and equipment history. Share hygiene practices with club members, especially if you lend equipment. Our article on Equipment Sharing and Cooperatives covers safe sharing. Make hygiene part of every youth beekeeper's training, with an adult checking techniques.

FAQ

Do I need to disinfect my hive tool between every colony?

Not for routine inspections of healthy colonies. Scrape it clean each time, and use a wash, flame or spare tool between colonies if you suspect disease.

Is scorching boxes enough to kill AFB spores?

Scorching is common practice, but it may not guarantee complete sterilization. For AFB, follow your inspector's regulatory instructions, which may require burning or irradiation.

Can I use bleach to clean hive equipment?

Avoid it unless an authority recommends a specific method. Residues can harm bees. Use scraping, hot water, detergent and approved methods.

Keep learning

Browse all 500 guides →