Beekeeping Directory

Home › Guides › Pests, Diseases & Health › Wax Moth Control in Storage

Pests, Diseases & Health

Wax Moth Control in Storage

Most wax moth damage never happens in a hive. It happens in the spare supers stacked in a garage, shed or honey house between seasons, where no bees patrol and the moths have weeks of warm darkness to work. A single neglected stack can lose dozens of drawn combs, which represent a large investment of bee labor and wax. This article is the storage-specific companion to the general wax moth guide. It covers preparing comb, freezing, cold and airflow methods, light and stacking, what not to use, and how to check on stored equipment through the year.

Why storage is the weak point

In a living colony, bees remove eggs and larvae before they can establish. In storage, the only defenses are the ones you build. Moths locate comb by smell, enter through any gap, and lay eggs in the crevices of boxes and frames. Larvae then eat through dark comb, especially comb that has held brood and contains cast skins and pollen.

The environmental levers are temperature, light, and moisture. Warm, dark, still storage encourages several generations of moths in one season. Cold storage slows or stops development. Drawn comb that has only held honey is less attractive than old brood comb, but it is not immune.

Think of storage as a fresh start each season: clean the comb, kill whatever might be present, and then keep new moths out or make the conditions hostile. Read Wax Moth: Greater and Lesser first for identification and life cycle if you have not yet seen the pest.

Preparing comb for storage

Before storing, make sure the comb is as free of food residues as possible. Supers that have been extracted should be given back to the bees to clean, placed above an inner cover or beside a hive for a few days, so that sticky honey is removed. Wet supers attract moths, ants, mice and beetles.

Sort comb into groups:

  • Honey super comb, light and never used for brood, is lowest risk.
  • Brood comb, dark and old, is highest risk and should be inspected closely.
  • Comb with disease history needs special handling, not storage, as discussed in Apiary Hygiene: Equipment Cleaning and Disinfection.
  • Damaged comb, with mold, tunneling or uneven cells, should be culled and rendered.

Discard or render any comb that is old enough to be dark and heavy with cocoons. Comb Rotation: Why and When explains how to retire comb on a schedule so that you are never storing a mass of old brood comb.

Freezing: the simplest reliable method

For small and moderate amounts of comb, a chest freezer is the cleanest solution. Freezing kills all life stages of wax moth when frames are held cold long enough. A common recommendation is to freeze for at least 24 hours at a typical deep freeze temperature, with a longer period for thick stacks or to be safe.

Procedure:

  1. Place frames or whole supers into a freezer. Large supers may need space and time, because the center cools slowly.
  2. Hold them frozen for a day or more.
  3. Remove and let them return to room temperature in a sealed bag or box so that condensation forms on the bag and not on the comb.
  4. Store them immediately in a moth-tight container.

Freezing kills what is present, but it does not protect against reinfestation. A frozen frame left in an open stack can be laid with eggs again. Always follow freezing with sealed storage. The same freezing step also helps with small hive beetle stages; see Small Hive Beetle (SHB): Identification and Control.

Cold and airflow methods

In cold climates, an unheated outbuilding in winter handles the problem for you, because moths are inactive when it is cold. Stack supers so that air and light can reach them, with spaces between boxes. Open the stack to air in autumn and spring when days are warm.

Practical stacking ideas:

  • Place supers crosswise with gaps, so air moves through the stack.
  • Use a screened or ventilated building that excludes moths and mice.
  • Raise the bottom box off the floor, using a pallet, to avoid ground moisture.
  • Cover the top with a lid or board to keep out light, dust, and egg-laying adults.

Light also deters moths. Supers stored in bright, ventilated rooms are less attractive than those in dark closets. In warm climates, ventilation alone is often not enough, and you should combine it with freezing before storage, or with other measures such as sealed containers.

Sealed storage and registered products

Sealing is a simple measure. Stack supers on a tight bottom, cover with a solid top, and seal the joints with tape, or use large plastic bags or lidded totes. If the comb was moth-free when sealed, the moths cannot get in. Allow for some air exchange to prevent mildew, and ensure that comb is dry.

Some products are registered for wax moth control in stored comb. Examples include certain biological products based on a bacterium specific to moth larvae, or fumigants labeled for the purpose. Registered products, doses, and handling requirements differ by product and region. Read the label, wear the protective equipment it requires, and follow local law. Do not improvise with other chemicals.

Never use mothballs, which contain naphthalene or paradichlorobenzene. These can leave residues in wax and honey and are not approved for bee equipment. Fumigation with certain chemicals also requires airing out comb for a specified time. If you are unsure, contact your extension office.

Special situations

Comb honey and cut comb need extra protection. These products contain comb that is part of the finished product, and moth damage destroys their value. See Wax Moth in Comb Honey: Prevention for the specific steps.

Dead-outs, where a colony has died over winter, can be a source of heavy moth infestation. Remove the comb promptly, assess it, freeze or discard it, and keep the boxes clean. Do not leave dead-out hives sitting through summer.

Stored foundation, plastic frames, and empty woodenware are less attractive to moths but can harbor cocoons or eggs in joints. Scrape and inspect them. For basic storage guidance for the rest of your equipment, see Storage: Keeping Equipment Clean and Dry.

Checking on stored equipment

A stack of supers is not a set-and-forget item. Schedule checks:

TimeAction
After extractionReturn wet supers for bees to clean, then freeze or seal
Early autumnCheck for moths and cocoons before cold arrives
MidwinterQuick look, especially in a warm spell
Early springInspect each box before putting it on a hive
Mid summerIn warm climates, inspect monthly

Look for webbing, cocoons, frass and small larvae. If you find an infestation, remove affected frames and freeze or render them. Wash hands and tools, and clean the box with a scraper.

Keep a stack record, noting where each group of supers is and when it was frozen. A club storage day, when members share freezer space, can protect many sets of comb at little cost.

FAQ

How long should I freeze comb to kill wax moth?

A common recommendation is at least 24 hours in a deep freezer, longer for large stacks. After freezing, let comb warm in a sealed bag and store it moth-tight so that it is not reinfested.

Is it safe to use paradichlorobenzene or mothballs on stored supers?

No. These chemicals can leave residues in wax and honey and are not labeled for bee equipment. Use freezing, cold, airflow, sealing, or products registered for wax moth in stored comb, following the label.

Do I need to protect foundation and new frames?

Fresh foundation is rarely attacked, but clean and inspect woodenware for cocoons in joints. Store it in a dry, sealed space with the same care as drawn comb.

Keep learning

Browse all 500 guides →