Beekeeping Directory

Home › Guides › Pests, Diseases & Health › SHB Traps: In-Hive and Ground

Pests, Diseases & Health

SHB Traps: In-Hive and Ground

Traps are one of the few practical tools for dealing with small hive beetles without chemicals. They do not replace strong colonies, but they reduce adult numbers and give you a way to monitor pressure. The trouble is that the market is full of designs, and beginners often buy a trap, install it wrong, and conclude that traps do not work. This article explains how in-hive and ground traps function, how to pick among them, how to place and service them, and what to do with captured beetles.

How trapping works

Adult beetles are attracted to the hive for brood, pollen and honey, but they are hunted by bees. A beetle fleeing guard bees looks for a dark crevice. Most traps exploit that behavior by offering a narrow slot that bees cannot enter but beetles can. Once inside, the beetle falls into a reservoir or is trapped in a liquid or on a surface.

Some traps use an attractant or bait, such as a fermenting substance, to lure beetles. Others rely only on shelter. Traps catch beetles; they do not kill larvae in comb or break the pupation cycle in soil. They are best understood as one part of an integrated plan alongside strong colonies and sanitation, described in Small Hive Beetle (SHB): Identification and Control.

Trap catches also tell you something. A sudden rise in beetles can signal a weak colony, high local pressure, or a problem with stored equipment.

Types of in-hive traps

In-hive traps fall into broad categories.

TypeHow it worksStrengthsLimitations
Frame-style trapFits between frames, with a reservoirEasy to placeCan interfere with bee space; must be refilled
Top-bar or inner cover trapPlaced under the coverBeetles flee upwardCan be propolized
Bottom board trapPart of the bottom board or insertedCatches beetles dropping or fleeingOpen screens let some beetles escape
Tray trapsReservoirs of liquid or sticky surfaceInexpensiveRequires servicing

Many designs use a reservoir filled with a liquid, such as vegetable oil or a product specified by the maker, to drown beetles. Follow the manufacturer's instructions for what to place in the trap. Never add pesticides or other substances not described in the product instructions. Some oils and attractants can contaminate honey or harm bees if spilled.

Ground and apiary traps

Ground traps aim at wandering larvae and adults outside the hive. Barrier traps placed below the hive entrance can capture beetles leaving or arriving. Some beekeepers place a trap or barrier beneath hives, on the ground, to catch larvae that drop out when they wander to pupate.

Cloth or fabric ground covers that trap or block larvae, or sticky traps, can reduce the number of larvae reaching the soil. Because ground traps can also catch other insects, check them and avoid placing them where pets, children or wildlife will disturb them.

If your hives are on stands, consider whether a ground trap fits the layout. See Hive Stands: Types and Construction for how stand design affects ground access, ventilation and moisture. Dry, sunny sites reduce beetle pupation and improve your results.

Choosing and placing a trap

Start with the pressure level. In regions where beetles are rare, a single inner cover trap may be enough. In the Southeast, where pressure is high, consider combining a trap with soil management and strong colony practices.

Placement guidelines:

  1. Put traps in the area where beetles gather, usually at the back or top of the hive body.
  2. Place them so that bees can still maintain proper bee space, usually a little over a quarter inch, avoiding propolized gaps.
  3. Avoid placing a trap on a colony that is queenless or very small; fix the colony first.
  4. In brood boxes, make sure the trap does not interfere with the cluster in winter.

Always read the manufacturer's instructions, since designs vary. If your colony uses medium or shallow boxes, check the fit before you buy. Our guide to Deep vs. Medium vs. Shallow Boxes helps you plan the equipment size that will fit your traps.

Servicing traps

A trap that is never serviced becomes a problem. Check every one to two weeks in warm weather. Look at how many beetles are in the reservoir, whether the liquid has evaporated or spilled, and whether bees are being drawn in.

Servicing steps:

  • Pull the trap gently and avoid spilling the contents on frames.
  • Empty and dispose of beetles. Seal them in a bag and put them in the trash, or freeze them, rather than dumping them at the apiary.
  • Refill the reservoir according to instructions.
  • Clean propolis and debris so that the slot stays open.
  • Record counts in your notebook.

If you find no beetles in a trap for weeks while beetles are visible on the comb, the trap may be poorly placed or blocked.

Common problems and mistakes

Several errors undermine traps.

  • Using a trap as a substitute for colony strength. A weak colony will still be overwhelmed.
  • Overfilling or using the wrong liquid. Spilled oil can coat bees and honey.
  • Ignoring sanitation. Wet supers in the honey house will produce beetles even if hive traps work.
  • Leaving traps in place through winter when the cluster needs unobstructed space.
  • Placing traps in locations that obstruct ventilation.

Another mistake is expecting a clean catch from day one. Traps can take a week or more to pick up, because bees may propolize them first or beetles may not find them. Give each trap a fair trial before changing designs.

Integrating traps into your plan

A sensible pest management sequence is: monitor, keep colonies strong, reduce excess space, manage soil, and use traps for adults. Extract honey quickly, freeze or protect stored comb, and keep a log. If numbers remain high despite these steps, consult your state apiarist or extension office about registered products and local rules.

Where equipment is stored, use the methods outlined in Wax Moth Control in Storage, since the same storage rules limit beetle development. Combine this with Apiary Hygiene: Equipment Cleaning and Disinfection to reduce reinfestation.

Keep a simple trap log with the date, the hive, the beetle count and any notes on colony strength. After a season you will see which yards carry the most pressure and whether your changes, such as shifting a hive to a drier spot or removing a spare box, actually lowered the counts. That record is also useful if an inspector or extension agent asks what you have tried.

A club can help by comparing results. Different trap designs perform differently in different climates, and local experience is worth more than a catalog description.

FAQ

Do traps eliminate small hive beetles?

No. They reduce adult numbers and help you monitor pressure, but they do not stop larvae in comb or pupation in soil. Use them with strong colonies, sanitation and soil management.

What should I put in the trap reservoir?

Use only what the manufacturer specifies, such as the oil or liquid named in the instructions. Do not add pesticides or unlabeled substances to hive traps.

How often should I check traps?

Every one to two weeks during warm weather. Empty captured beetles, refill as directed, and clear propolis so the entry slots stay open.

Keep learning

Browse all 500 guides →