Beekeeping Directory

Home › Guides › Equipment & Hive Types › Varroa EasyCheck and Monitoring Tools

Equipment & Hive Types

Varroa EasyCheck and Monitoring Tools

You cannot manage varroa by looking at your bees. Mites are small, many are hidden under brood cappings, and by the time a colony shows visible damage, the infestation is serious. Monitoring tools turn a guess into a number, and a number tells you whether to treat, whether treatment worked and how your colony compares to others. This article explains the main monitoring methods, including the EasyCheck-style shaker jar, alcohol wash, sugar roll and sticky board, and the equipment you need to run them accurately and safely.

Why measure mites

Varroa mites feed on bees and brood, spread viruses and weaken colonies over a season. A colony can look strong in August and collapse by November because mite numbers rose unnoticed. The number of mites per hundred adult bees is the standard metric, and it gives a measurable threshold for action.

Regular monitoring also tells you if a treatment worked. After you apply a product, a second count shows whether mite levels dropped as expected. This detects resistance and application mistakes, which are common. See Varroa Monitoring: Alcohol Wash vs. Sugar Roll for the strategy and Integrated Pest Management for Varroa for how monitoring fits into a plan.

Monitoring tools are cheap compared with the value of a colony. A basic kit costs a few dollars, and some beekeepers build their own from jars and mesh. The key is to use a consistent method, record each result and act on the data. The Bee Informed Partnership and your state apiarist can offer advice on thresholds for your region.

The EasyCheck device

The Varroa EasyCheck is a commercial tool designed to make alcohol washes quicker and cleaner. It is a plastic container with a screened insert and a measuring cup. You scoop bees from a brood frame into the cup, drop them into the container with alcohol, and shake or swirl. Mites detach from the bees and pass through the screen, where you count them in the clear lower compartment.

The advantage is convenience. The design makes it easy to measure a standard sample, which is about 300 bees or half a cup, and to see the mites clearly. It is lightweight and reusable, and you can count in the field. The disadvantage is that you sacrifice the bees in the sample, because alcohol kills them.

Follow the maker's instructions for the volume of alcohol and the time of shaking. Common alternatives to commercial devices include a wide-mouth jar with mesh lid and a half-cup measure, which do the same job. Keep alcohol containers sealed and away from flame.

Alcohol wash

The alcohol wash is considered the most accurate field method, and many researchers use it as the standard. You collect about 300 bees, which is roughly half a cup, from a frame of open brood where nurse bees gather, taking care not to include the queen. Place them in a jar with alcohol, which can be isopropyl rubbing alcohol or another product recommended by your local extension, and shake for about a minute.

The alcohol dislodges mites, which fall through a coarse mesh into a second container or white tray, where you count them. Divide the number of mites by the number of bees and multiply by 100 to get a percentage. For example, 9 mites in 300 bees equals 3 percent.

The method kills the sample bees, but 300 bees out of tens of thousands is a small loss. Use a consistent sample size and frame selection for comparable results. Keep alcohol away from sparks, because it is flammable, and dispose of used alcohol properly. See Varroa Monitoring: Alcohol Wash vs. Sugar Roll for guidance on how often to sample.

Sugar roll

The sugar roll, or powdered sugar shake, is a non-lethal alternative. You place about 300 bees in a jar with a mesh lid, add a measured amount of powdered sugar, roll or shake the jar to coat the bees, then let it sit for a minute or two. The sugar makes bees groom each other and causes mites to fall off. Invert the jar over a white surface or a tray with water to count the mites that fall through the lid.

The bees survive and can be returned to the hive, which many beekeepers like. The trade-off is lower accuracy. Humidity, sugar type and how long you shake all influence the result, and sugar rolls usually recover fewer mites than alcohol washes. Use powdered sugar without anti-caking additives if possible, and keep the sugar dry.

Interpret sugar roll counts as an estimate. Some beekeepers use a sugar roll for routine checks and an alcohol wash for confirmation when counts are near a threshold. Always release bees at the hive entrance, away from the colony's guards, and keep the queen out of the sample.

Sticky boards and mite drop

Sticky boards measure natural mite drop. A sheet coated with oil or sticky material, or a white board under a screened floor, catches mites that fall from bees over 24 to 72 hours. You count mites on the board and divide by the number of days to get an average daily drop.

This method is simple and does not harm bees, but it is the least reliable for deciding thresholds. Drop numbers vary with brood cycles, weather, ants and debris, and the relationship to infestation per bee is imprecise. Use sticky boards to monitor trends or to check treatment results, because mite drop rises sharply after an effective miticide.

Fit the board under a screened bottom board, with an inner screen guard so bees cannot reach the sticky surface. A white board shows mites clearly, and a grid helps counting. Check for ants and wax moths, which remove mites and debris. See Screened Bottom Boards: Varroa Reduction for how boards work, and combine with other methods for confidence.

Brood uncapping

Uncapping drone brood is another tool for assessing mites. You use an uncapping fork or fine tweezers to pull out drone pupae from a patch of brood, then look for mites on the pupae. Mites prefer drone brood, so drone cells offer a quick sample. It tells you whether mites are present, but not the infestation level accurately unless you sample a standard number of cells.

This method is useful for teaching and for quick spot checks. It also fits in with drone brood trapping for control, as described in Drone Brood Removal for Varroa Control. It does not replace washes, because it samples a different population and requires opening brood, and drone cells are not always available.

Practise handling the frames gently and replace the comb. Avoid contaminating hives by cleaning tools between colonies, as in Apiary Hygiene: Equipment Cleaning and Disinfection. Record the number of mites and cells examined.

Equipment checklist

A basic monitoring kit includes the following.

  • A wide-mouth jar with a mesh lid, or a commercial shaker device
  • A half-cup or 1/2 cup measuring scoop for bees
  • Isopropyl alcohol for washes, and powdered sugar for rolls
  • A white tray or sheet for counting
  • A soft brush or spoon for collecting bees
  • Sticky boards or inserts if using mite drop
  • Notebook, pen or app for records
  • Hive tool and smoker, in the usual way

Optional extras include a magnifier for counting, a spare container for dumping alcohol and a small funnel. Label jars and avoid food containers. Keep alcohol and sugar separate and clearly marked.

Check supplies at the start of the season. Replace worn mesh and cracked jars. Wash equipment between apiaries and rinse thoroughly. Store everything in a dry place so it is ready when needed. See Storage: Keeping Equipment Clean and Dry for general advice.

Interpreting results and acting

Thresholds vary by region, season and the guidance you follow. Many beekeepers use a rule of thumb of treating when mite counts reach about 2 to 3 percent, or 2 to 3 mites per 100 bees, in spring or summer, and acting even earlier in late summer when the colony is preparing for winter. Check your local extension or state apiarist for current recommendations, as thresholds are updated as research evolves.

Test at least monthly during the active season and more often in late summer, when populations rise. Record each result with the date, hive and method, and test after any treatment. If counts exceed the threshold, follow an integrated plan, using label-approved treatments. If a treatment fails, test again and consider a different product or method.

Remember that a single colony can reinfest from neighbours, so monitor all hives, not just one. Keep sampling methods consistent. Combine monitoring with strong stock and good management. See Oxalic Acid Vaporizers for one treatment option and Varroa Mite Monitoring for Youth Beekeepers for youth-focused guidance.

FAQ

Which varroa monitoring method is most accurate?

An alcohol wash is generally the most accurate field method. Sugar rolls are non-lethal but usually less accurate, and sticky boards give only a rough indication.

How many bees should I sample?

About 300 bees, roughly half a cup, from a brood frame. Avoid the queen, and use the same sample size each time so results are comparable.

How often should I test for mites?

At least monthly in the active season, more often in late summer, and before and after any treatment. Local guidance from your extension or state apiarist may adjust this.

Keep learning

Browse all 500 guides →