Beekeeping Directory

Home › Guides › Queens & Breeding › Grafting: The Doolittle Method

Queens & Breeding

Grafting: The Doolittle Method

Grafting means transferring a very young larva from a worker cell into an artificial queen cup so a cell-building colony will raise her as a queen. It is the technique behind most commercial and serious hobby queen production, and the Doolittle method, developed in the 1800s by G. M. Doolittle, remains the standard approach. Grafting looks fiddly at first, but the underlying skill is simple: choose the right larva, move it gently, keep it moist and warm, and give it to a colony that is ready to feed it. This article covers tools, preparation, the step-by-step transfer, and the troubleshooting that separates a 30 percent take from a 90 percent take.

Why graft at all

Letting a colony choose its own larvae, as in an emergency or a walk-away split, leaves quality to chance. Grafting puts you in charge. You pick the mother colony, you decide the larval age, and you can raise dozens of queens at the same moment from the same stock. That consistency is what makes comparison and selection possible, so queens within a batch are true sisters from one mother and can be compared fairly in later testing.

Grafting is also scalable. A skilled grafter can move fifty larvae in well under an hour. It does, however, demand good light, steady hands and practice. If you are new to queen rearing, read Queen Rearing: An Introduction first for the overall cycle, and keep Miller Method: Simple Queen Rearing in mind as a gentler alternative while you build skill.

Tools and supplies

You do not need much, but each item matters.

  • Grafting tool. A Chinese-style tool with a flexible, spoon-shaped tip is popular, and metal and plastic-tipped alternatives also work. Choose what feels comfortable.
  • Queen cups. Plastic cups are common and reusable; wax cups made by dipping dowels are traditional and often accepted readily.
  • Cell bars and frame. Bars hold the cups at the right height, mounted in a frame that fits the builder colony.
  • Light and magnification. A bright headlamp or lamp, and a magnifier or reading glasses, make tiny larvae easy to see.
  • Damp cloth. Keep grafted cups covered with a damp cloth so larvae do not dry.
  • Priming material. Some breeders add a drop of diluted royal jelly to each cup. Others skip it, particularly with dry grafting.

More on cups and bars is in Queen Rearing Equipment: Grafting Tools and Cells.

Preparing the larvae

Larval age is everything. You want larvae that hatched from the egg within the last 24 hours, and ideally closer to 12 to 18 hours old. Younger larvae are tiny, curled in a C shape, floating on a bead of jelly. Older ones are larger and have started to fill the cell floor.

To get larvae of known age, many breeders confine the breeder queen on a clean, drawn comb with a queen excluder cage for about 24 hours, then release her. Three days later, the frame is full of larvae within the right age window. Without confinement, you can use a frame with eggs only, and graft when eggs have just turned to tiny larvae, but timing is harder to control.

Select a mother colony chosen for your breeding goals, covered in Selecting Breeder Queens, and pull the grafting frame about three days after confining the queen. Take the frame to a warm, humid, draft-free spot, since larvae chill and dry quickly.

Doing the graft step by step

Prepare the cell cups first, so you work quickly once the frame is out.

  1. Set up the workspace. Work indoors or in a shaded, warm spot, around 85 to 90 percent humidity if possible, with the grafting frame tilted toward the light.
  2. Locate young larvae. Find the smallest larvae, floating on jelly in worker cells.
  3. Slide the tool beneath. Work from the side of the larva, slide the tip under the jelly bead and lift gently so the larva rides on its jelly.
  4. Touch it to the cup. Place the larva at the base of a cup and withdraw the tool, leaving the larva centered. Avoid turning the larva over or pressing down.
  5. Work in order. Graft the entire bar before moving it, then cover it with a damp cloth.
  6. Deliver promptly. Place the bar in the builder within minutes.

If larvae drown in the jelly, the cell cups are too wet. If they stick to the tool, the tip is too dry. A tiny adjustment in technique often fixes it.

Dry versus wet grafting

In dry grafting, the larva is placed in an empty cup. The bees add their own jelly, and many breeders find this sufficient in a strong flow. In wet grafting, a drop of royal jelly diluted with water is placed in each cup first, and the larva is set on top. Wet grafting often gives a higher initial acceptance, particularly in a weak flow, but it adds a step and requires fresh jelly.

Whether to use a fresh jelly source, such as cells from an earlier cycle, is a practical question. Collected jelly is perishable and should be refrigerated. Some breeders freeze small portions. Do not substitute honey, sugar syrup or commercial supplements for royal jelly, because they can compromise larval development.

Giving grafts to the builder

A graft is only as good as the colony that receives it. A well-prepared builder is strong, packed with young nurse bees, and supplied with open feed and incoming nectar. Details on building these colonies are in Queen Cell Builders and Starter/Finisher Colonies. Queenless starters, queenright setups with excluders, and the Cloake board approach in Cloake Board Method all work if the colony is populous and fed.

Place the grafted bar in the center of the cluster, between frames of open brood, where nurses concentrate. Check after 24 hours. A healthy acceptance shows cups lengthened and surrounded by nurses, with larvae floating in abundant jelly. Cups that were ignored should be removed, since leaving rejected cups wastes space and may encourage the bees to build emergency cells elsewhere.

Timeline from graft to emergence

Because you grafted a larva roughly one day old, the queen's development clock is already about three to four days into the 16-day total, counting from the egg. That means:

Day after graftingEvent
0Larvae grafted, bar given to the builder
1Check acceptance
5 to 6Cells are capped
9 to 10Move cells to cell bank or mating nucs
11 to 12Cells ripe, queen emerges soon after

Exact dates vary with larval age and temperature, so keep your own notes. Handling cells carefully matters most in the capped, pupal period, and details of keeping them are in Cell Banking and Transport.

Troubleshooting a low take

When few grafts are accepted, work through a short diagnostic list.

  • Builder too weak or underfed. Add nurse-heavy brood frames and feed syrup and pollen if the flow is thin.
  • Larvae too old. Re-check the confinement timing.
  • Cups too cold, dry or smelly. New plastic cups may carry odors, so some breeders leave them in a hive for a day first.
  • Rough handling. Use a steady, minimal touch and avoid pressing larvae into the cup.
  • Builder queenright with competing larvae. In some setups, bees prefer natural emergency cells, so remove any they start.
  • Poor weather or no flow. Even a perfect graft fails when the colony is not in a rearing mood.

Keep a record of each batch, including percent accepted. Over a season, those numbers show whether you are improving.

FAQ

How old should larvae be for grafting?

Aim for larvae under 24 hours old, and ideally 12 to 18 hours, since older larvae will have already received worker food and tend to produce poorer queens.

Can I graft without a special tool?

Yes, a clean fine paintbrush, a sliver of wood or a bent toothpick can work, but a proper grafting tool glides under the larva more reliably and is cheap.

Why do bees ignore my grafted cups?

Common reasons are a weak or underfed builder, old or damaged larvae, cold or dry cups, and no ongoing nectar flow, so check the builder's strength and feeding first.

Keep learning

Browse all 500 guides →