A top bar hive is a horizontal box with removable wooden bars laid across the top, from which the bees build their own comb with no frames and usually no foundation. Many beekeepers are drawn to it for its gentle, low-lift management and its natural comb. In practice, it rewards patience and observation, and it demands different skills from a stacked Langstroth. This article covers how the hive works, how to build or buy one, how to manage it through the seasons, what to expect from honey production, and the real drawbacks that enthusiasts sometimes skip. I have built top bar hives in several sizes and kept bees in them alongside conventional equipment.
How a top bar hive works
A top bar hive (TBH) is a long trough, usually with sloped sides, covered by a row of bars. Each bar is a few inches wide, with a guide, such as a bevel, a groove with wax, or a comb strip, along its underside. The bees attach comb to each bar and draw it downward. The hive is worked from the side, and the bars are lifted one at a time.
Because the comb hangs free from only one bar, it is delicate, especially in warm weather or when filled with honey. Beekeepers rotate each comb carefully, keeping it vertical, and avoid pressing against side walls. In contrast to a Langstroth, there is no standardised frame, so combs cannot be traded between colonies unless the bars match.
TBHs in various forms are used widely around the world, including in many parts of Africa, where low-cost versions have supported community beekeeping. In North America they are popular among hobbyists and educators.
Design details that matter
A functional TBH relies on correct geometry:
- Slope of the sides: commonly about 120 degrees, which discourages the bees from attaching comb to the walls.
- Bar width: about 1 3/8 inches (35 mm) is a common size for brood-nest bars, and many keepers use slightly different widths for honey storage.
- Length and volume: many hobby hives hold roughly 30 to 33 bars; some are shorter.
- Follower boards: movable partitions that confine the colony to a smaller space, which is essential for managing the nest in a hive that has no stackable boxes.
- Entrance: end or side entrance, with the end often placed near the brood area.
- Legs and roof: the box should stand at a comfortable working height, and the roof must shed rain and shade the bars.
Tight bar fit and a well-made guide are what stop cross-combing, where bees build comb diagonally across several bars. Small mistakes in bar spacing cause outsized problems.
Seasonal management
A top bar colony expands horizontally, and the beekeeper shapes that growth with followers.
- Spring: begin with a nucleus or package confined to a small space, with a follower board on one side. Move the follower back as combs are drawn.
- Build-up: the brood nest forms at the entrance end, with honey stored further back and pollen near the brood. Add empty bars next to the last drawn comb, not at the far end.
- Honey flow: harvest honey bars that are fully capped and located beyond the brood area.
- Fall: consolidate the colony with a follower and make sure enough stores sit near the cluster.
- Winter: the cluster moves sideways across the combs, and it can become stranded if stores are far from it, so winter placement of honey matters.
Cold-climate keepers often find top bar colonies harder to overwinter unless they are well insulated and carefully prepared. See Preparing Your Hive for Winter: First-Year Edition and Winter Covers and Insulation Kits.
Honey harvest and comb handling
Honey is usually harvested as cut comb or crush-and-strain, since the delicate natural comb does not survive an extractor. You cut the comb from the bar, leaving a strip for the bees to rebuild, then drain the honey through a strainer or package it as comb honey.
Yields are typically lower than from a Langstroth, because the bees must rebuild comb each year. Wax has real value of its own, and many keepers enjoy using it, but it also means the bees spend resources on construction rather than storage. Plan on a modest crop and treat it as a bonus. For handling harvested honey, see Extracting Honey: Step by Step.
Mites, pests and health
A top bar hive does not make bees immune to varroa. Mites reproduce in brood cells just as they do in any hive, and untreated colonies can crash. Natural comb does not protect against viruses. Conscientious TBH keepers still monitor for mites and make a treatment plan; the difference is that sampling may be more awkward because brood combs are fragile.
Tools like sugar rolls or alcohol washes work the same way, and you can use a screened bottom or a sticky board if the hive design allows. Read Varroa EasyCheck and Monitoring Tools to see what fits. Small hive beetles and wax moths exploit weak colonies in any design, so strong populations and appropriate space matter more than hive type.
Advantages of a top bar hive
- Lifting is limited to individual bars, usually only a few pounds each, which suits beekeepers with back or strength problems.
- Equipment is inexpensive to build, with simple tools and local lumber.
- The bees build natural-sized cells, which many hobbyists find rewarding.
- Inspections are gentle, since you open only a section at a time.
- Wax and cut-comb honey are excellent by-products.
Disadvantages to weigh honestly
- Lower honey yield than most Langstroth setups.
- Combs are fragile and can collapse in heat.
- Equipment is not standardised, making swaps, splits and equipment borrowing harder.
- Mite management, queen rearing and feeding require extra improvisation.
- Strong colonies may swarm if you do not give timely room.
- Cold-climate overwintering needs experience.
If your goal is to learn bee biology and keep a few colonies in your backyard, a TBH is a good teaching tool. If you want to run a dozen colonies for honey sales, a standard system is more practical. Compare designs side by side in Comparing Hive Types: Which Is Right for You?.
Getting started
Buy or build a hive with good bar geometry, source bees from a local supplier, and ask a mentor who has actually managed TBH colonies. Read about Langstroth Hive: The Standard Explained too, because many of the lessons about swarming, queens and mites apply to every design. Keep a notebook, inspect regularly, and be ready to correct cross-combing early, while the combs are still small.
FAQ
Do top bar hives need foundation?
No. Bees draw their own comb from a guide on each bar, such as a bevel, groove or thin wax strip, which is why the hive is considered a foundationless system.
Can I extract honey from top bar combs?
Generally not with a standard extractor, since natural comb is too fragile; most keepers cut the comb or crush and strain it.
Are top bar hives easier for beginners?
They are physically easier, with no heavy boxes, but they are not simpler biologically, and mentors and written resources are scarcer than for Langstroth hives.