Jars are the face of your honey, and the equipment that fills them decides how much honey you waste, how many bubbles you trap and how fast the day goes. A good bottling setup can be as simple as a bucket with a gate and a stack of jars, or as elaborate as a pump-fed filling machine with a conveyor. This article covers the containers worth buying, the filling gear that suits each scale, closures and sealing, and the practical details of labelling, sanitising and storing finished honey.
Choosing containers
Honey is sold in glass, plastic and occasionally metal. Glass is the premium choice. It does not absorb flavours, looks clean and is easy to recycle, but it is heavy, breaks and costs more to ship. Plastic is lighter and cheaper. Food-grade PET or polypropylene squeeze bottles are common for table honey and for children's events. Both materials are fine if they are food safe.
Standard sizes are 8 ounce, 12 ounce and 16 ounce weights, plus 1 pound jars and 2 pound or 5 pound containers for bulk. Honey is sold by weight, not volume, so always weigh a few jars to calibrate your filling. A 12 ounce honey weight fills about an 8 fluid ounce container, because honey is denser than water.
Popular shapes include classic queenline jars, round hex jars, square jars and bear-shaped squeeze bottles. Pick a shape that suits your market. Hex and queenline jars are classic and display well, and squeeze bottles sell to families. For ideas on presenting honey, see Honey Packaging: Jars, Labels, and Branding and Building a Honey Brand.
Filling equipment by scale
For a few hives, a bottling bucket with a gate is all you need. Raise it on a stable table so jars sit below the gate, and open the gate gently. Hold the jar at a slight angle at first, then straighten as it fills to reduce bubbles. This method is cheap and effective for dozens of jars an hour.
For larger batches, add a pump. A food-grade honey pump moves honey from a settling tank to a filling nozzle. Gravity-fed fillers with an adjustable volume setting can fill jars quickly and consistently. Heated tanks and warming wraps keep honey flowing in cool rooms.
Commercial operations use piston fillers and automatic lines. These are costly and are justified only when you bottle thousands of jars. Before upgrading, ask whether the problem is the equipment or your process, and consider borrowing or renting from a club. For preparation steps, see Honey Buckets and Filters.
Gates, nozzles and drip control
A clean stop is the mark of good bottling. The gate should close smoothly and cut off the flow without drips. Some beekeepers fit a short silicone or stainless nozzle to the gate. A drip tray under the filling station catches stray honey and keeps your table tidy.
When you finish a jar, close the gate before moving it, and tilt the gate upward if it has a lever. A jar-sized silicone mat or a baking tray under the gate catches drips. Keep a damp cloth ready and wipe rims before capping. Honey on threads makes lids stick and attracts ants.
If gates are slow, warm the honey gently to around 95 to 105 degrees Fahrenheit. Never push thick honey through a small valve. Sticky gates, poor seals and leaks waste product, and you should replace worn parts promptly. Keep spare gates and washers in your toolkit, and clean them as part of your end-of-day routine.
Lids, seals and tamper evidence
Lids should seal tightly and be made for food. Metal lids with a plastisol liner work well on glass jars, and plastic lids with a foam or induction liner suit plastic jars. Check that the lid size matches the jar thread, which is usually given in millimetres.
Some sellers add tamper-evident seals such as shrink bands or pressure-sensitive stickers. These reassure buyers and are required in some jurisdictions or at certain markets. Check your local rules and your state's requirements for sealed containers, as honey labelling and packaging laws differ, which is covered in Honey Labeling Requirements by State.
Avoid reusing lids from other foods because they can carry odours. Cap jars while they are still warm to reduce the chance of airborne moisture, and screw lids on firmly but not so tight that threads strip. Test a few jars by inverting them to check for leaks.
Preparing jars
Clean jars before filling. New jars are usually clean but may carry dust, so rinse them and let them dry. Used jars need washing in hot soapy water, rinsing until no residue remains and drying completely. Sanitise with a food-safe sanitiser or a hot dishwasher cycle.
Moisture left in jars can spoil honey, particularly if the honey is near the upper limit of moisture content, so dry thoroughly. Place jars upside down on a clean rack, or use a low oven at about 200 degrees Fahrenheit for a few minutes to dry them. Let them cool before filling, since hot glass can crack and warms honey unevenly.
Use clean hands, hair covers and aprons, and keep pets and children out of the area. Keep all containers covered until needed. If you sell honey, follow cottage food rules and state guidelines, noted in Cottage Food Laws and Honey Sales.
Preventing bubbles and foam
Bubbles in jars look unattractive and are often caused by pouring from too high or too fast. Fill slowly, with the nozzle near the bottom of the jar and the honey running along the side. Keep the gate fully open instead of throttling it, which can introduce air.
Let honey settle in the bucket before bottling, as described in the filtering article. Cold honey traps bubbles, so work with honey that is warm and fluid. If bubbles appear after filling, let jars rest for a few hours, then skim the surface with a clean spoon or a toothpick.
Avoid stirring or pumping with too much agitation. Use a pump with low shear and keep the intake below the surface. A fine mist of air can also come from a leaky pump seal, so check connections. See Filtering Honey: Strainer Sizes for techniques that reduce air.
Labelling and finishing
Labels need accurate information. Most places require the product name, net weight, and the name and address of the producer. Some require a statement of ingredients or a country of origin. Rules vary by state, so verify with your department of agriculture. Never make health claims on labels, as discussed in Honey for Allergies: Fact or Fiction?.
Use waterproof labels or apply them to dry jars. Place them straight, and smooth out bubbles with a card. Add lot numbers or a harvest date, which helps if you need to trace a batch. Include a best-by date if your market expects one, noting honey keeps well when stored properly.
Finishing touches build trust. A neat label, a clean rim and a tidy lid make your honey look professional. If you sell varietal honey, say what flowers or location it comes from, as in Varietal Honey: Understanding Flavor Profiles.
Storage and handling after filling
Store jars at room temperature away from direct sun. Honey does not need refrigeration, and cold temperatures speed crystallisation. Crystallised honey is normal and can be gently warmed in a water bath to return to liquid, with temperature kept moderate to protect flavour.
Keep honey in a dry place, because it absorbs moisture from humid air, particularly if the lid is loose. Sealed jars last for years. Stack boxes carefully and avoid heavy weight on plastic lids.
Keep a small stock of spare jars and lids, a bucket for cleanup and a roll of paper towels. At the end of the day, wash and dry all equipment, and clean the table with warm water. See Storage: Keeping Equipment Clean and Dry for general advice on keeping equipment in good shape.
FAQ
What is the best container for selling honey?
Glass jars look premium and do not absorb flavours, while food-grade plastic is lighter and cheaper. Choose based on your market, shipping needs and budget, and always weigh jars because honey is sold by weight.
How do I avoid air bubbles when bottling?
Let honey settle in a warm bucket for a day or two, open the gate fully, and fill with the nozzle near the jar bottom. Skim any bubbles after jars rest.
Do I need special equipment to start bottling?
No. A food-grade bucket with a honey gate, clean jars and lids, and a stable table are enough for small harvests. Pumps and filling machines make sense only at larger scale.