Beekeeping Directory

Home › Guides › Equipment & Hive Types › Temperature and Humidity Sensors

Equipment & Hive Types

Temperature and Humidity Sensors

The inside of a healthy colony is one of the most tightly controlled environments in nature, and a small sensor can show you whether your bees are succeeding. A temperature probe in the brood nest reveals whether the colony is rearing brood, and a humidity sensor helps you understand moisture and winter condensation. This article explains what to measure and where, how the main sensor types work, how to install them without disturbing the colony, and how to interpret the numbers so you act on real signals instead of noise.

What the numbers mean

Bees keep the brood nest at roughly 93 to 95 degrees Fahrenheit, or 34 to 35 degrees Celsius, whenever brood is present. They generate heat by shivering flight muscles and cool by fanning and water collection. When brood rearing stops, the cluster temperature may drop to a lower range and track outside conditions, with the core temperature varying with the cluster's size and the weather.

A stable brood temperature of about 93 to 95 degrees tells you the colony has brood and is actively managing the nest. A drop in that temperature during spring or summer suggests brood loss, queenlessness or a very small cluster. In winter, a cluster core that rises and falls shows the cluster responding to cold snaps. For the biology, see How Bees Regulate Hive Temperature and Winter Cluster Dynamics: Heat Generation and Survival.

Relative humidity inside a colony varies, with brood areas often higher, and winter hives can have high moisture near the top that condenses on cold surfaces. Humidity data helps evaluate ventilation. Sensor values are useful trends rather than precise truths, and you should compare against the same hive over time.

Types of sensors

Digital temperature sensors, such as small chips with a probe, are cheap and accurate to about half a degree. They connect to a logger, a microcontroller or a commercial monitoring system. Combined temperature-and-humidity sensors measure both and are common in hive monitoring kits.

Simple battery-powered data loggers record readings at set intervals and store them on internal memory. You collect them at inspections and download the data on a computer. Wireless systems transmit readings via Bluetooth, LoRa, Wi-Fi or cellular networks to a phone or cloud dashboard.

Commercial hive monitoring systems often integrate sensors with scales and cameras, as in Hive Scales: Monitoring Weight and Hive Cameras and Remote Monitoring. Hobbyists also build sensors from kits using microcontrollers, which cost little but need technical skill and weatherproofing. Compare specifications for operating range, battery life, resolution and data logging interval.

Where to place sensors

Placement determines what you learn. For brood temperature, place a probe between the frames in the centre of the brood nest, where the warmest area lies, but this requires opening the hive. The probe should sit in a position bees will not propolise or chew, often fixed in a small tube attached to a frame.

For winter cluster monitoring, put a sensor near the top bars above the cluster, or between frames at the cluster's edge. A cluster moves slowly over the winter, consuming honey, so a sensor in a fixed location tracks only part of its path. Multiple sensors give a better picture.

Humidity sensors usually go in the upper part of the hive, under the inner cover or in a corner of the top box, where moisture collects. An external sensor outside the hive, shielded from sun and rain, provides a reference for ambient conditions. Without that reference, you cannot tell whether hive changes are due to weather or the colony. See Inner Covers: Telescoping vs. Migratory for ventilation features near the top of the hive.

Installing without harming the colony

Install sensors on a calm, warm day with minimum disruption. Use smoke gently and keep inspection time short. Place the probe between frames without crushing bees, and secure the cable so it cannot get pinched when you replace boxes. Many beekeepers route the cable through a notch or a drilled hole in a box, taking care to close gaps to keep out pests.

Choose sensors small enough not to disturb the bees. Bees tend to cover foreign objects in propolis, so protect electronics with a mesh cage or sealed housing. Wax moths and ants may be attracted to cables, so seal entry points with silicone or foam.

If you use wireless units inside boxes, check the battery life and how you will replace batteries without opening the hive. Test the system in advance on a spare box. For beginners, one or two sensors in one hive are enough to learn, and you can extend later. See Apiary Hygiene: Equipment Cleaning and Disinfection for working cleanly when handling equipment between hives.

Reading temperature data

A healthy brood nest shows a flat line near 93 to 95 degrees Fahrenheit with small fluctuations. If the temperature suddenly drops several degrees in the middle of the season, check for queen problems, brood loss, disease or a cluster that has moved away from the sensor. A temperature that climbs above 100 degrees may indicate overheating from direct sun, poor ventilation or a crowded hive.

In winter, the cluster core can swing widely. In deep cold, a cluster may maintain a core of 70 degrees or more, then increase when brood rearing resumes in late winter. A sudden decline to ambient temperature suggests the colony has died. This is a gloomy but useful signal, because you can plan a response and avoid losing equipment to pests.

ObservationPossible cause
Stable 93-95°F in spring and summerBrood rearing underway
Cooler, erratic readingsSmall cluster, queen loss or brood break
Rising above 100°FOverheating, poor ventilation
Winter drop to ambientCluster death or probe out of cluster
Rapid winter swingsCluster moving or responding to cold snaps

Always confirm with an inspection when something looks wrong.

Reading humidity data

Humidity is trickier. Inside the brood area, relative humidity is typically moderate to high because brood and nectar processing add moisture. At the top of the hive in winter, humidity can climb until it condenses on cold surfaces, which then drips onto the cluster. Dry air, in contrast, may stress brood and larvae.

Look for trends. A steady rise in humidity during cold weather suggests inadequate ventilation, and you may need to adjust upper entrances or insulation. A sudden drop may occur after you open a hive or when the weather changes. During a strong flow, moisture rises as bees cure nectar, and good airflow lets them dry honey faster.

Compare with outside conditions. If ambient humidity is high, hive humidity will follow. Avoid overreacting to single readings. Use averages over hours and days, and base changes on both data and what you see at inspections. See Winterizing Hives: Insulation and Ventilation and Honey Moisture: Why 18% Matters for how moisture affects stores.

Data logging and alerts

Set the logging interval to match your questions. Every 5 to 15 minutes gives a good view of daily patterns without producing huge files. Longer intervals save battery but lose detail on short events.

Alerts can notify you of unusual patterns, such as temperature dropping below a threshold. Use thresholds that make sense for your climate and hive state, and avoid so many alerts that you ignore them. Review data weekly, and look at trends, not individual points.

Keep records with notes about inspections, treatments and weather. Without context, data is hard to interpret. Back up your data and keep calibration records. Over several years, comparing seasons will teach you what normal looks like for your bees and your region. For digital tools that help organise this, see Beekeeping Apps and Digital Tools.

Limits and cautions

Sensors give only a partial view. A probe in one location may miss changes elsewhere, and the colony may move away from it. Interpreting data requires experience, and it does not replace inspection.

Electronics fail. Moisture, propolis, chewing and battery problems are common, so check them periodically. Do not rely on a sensor to tell you a colony is alive. Cheap sensors may drift or give inaccurate readings, so calibrate against a known thermometer in a controlled setting.

Keep in mind that adding equipment can bother bees and add risk of pests entering the hive. Consider whether the benefit justifies the intrusion. For many beekeepers, a few well-placed sensors in sample colonies provide enough insight, and the money is better spent on good management practices.

FAQ

What temperature should the brood nest be?

Typically about 93 to 95 degrees Fahrenheit (34 to 35 Celsius) whenever brood is present. Outside brood season, cluster temperatures vary with weather and cluster size.

Where should I put a hive temperature sensor?

For brood monitoring, place a probe between frames in the centre of the brood nest. For winter monitoring, place sensors near the top of the cluster, and use an external sensor for comparison.

Do I need to buy a commercial system?

Not necessarily. Simple data loggers or hobby sensor kits provide useful data at low cost. Commercial systems add convenience, remote access and integration with scales.

Keep learning

Browse all 500 guides →