Beekeeping Directory

Home › Guides › Equipment & Hive Types › Smokers: Selection and Fuel

Equipment & Hive Types

Smokers: Selection and Fuel

A smoker is a small metal firebox with bellows that lets you puff cool smoke at the colony. Smoke masks alarm pheromones and encourages bees to gorge on honey, which makes them calmer and easier to manage. Choosing a good smoker and learning to keep it lit are core beekeeping skills. This article covers how smoke works, what to look for when buying, the best fuels, how to light and maintain a smoker, fire safety, and how to use smoke without overdoing it. I have tested many designs and used nearly every fuel imaginable, including some I regret.

What smoke does

When a guard bee senses a threat, she releases alarm pheromone, which recruits more defenders. Smoke interferes with that signalling and may prompt bees to prepare for an escape by feeding on honey. The result is a colony that is less defensive and easier to inspect. Smoke is a tool for calming, not for incapacitating. Too much smoke irritates and confuses bees, and it can taint honey and drive bees from supers.

Most experienced keepers use small, cool puffs. The goal is to nudge, not to bury. See How to Open a Hive Without Getting Stung for how smoke fits into a complete inspection routine.

What to look for in a smoker

FeatureWhy it matters
SizeA larger firebox burns longer; 4 x 7 inch or 4 x 10 inch are common
MaterialStainless steel resists rust; galvanised or painted steel is cheaper
BellowsLeather or synthetic with strong spring return; check seams
Heat shieldA wire guard prevents burns on the barrel
Hinge and nozzleA good hinge stays shut; a wide nozzle prevents clogging
HookA hanging hook lets you attach it to the hive body safely

Beginners often buy a small smoker because it looks neat, then spend the season relighting. A larger one holds more fuel, burns longer and cools smoke before it exits. If you run several apiaries, a bigger smoker is worth the weight.

Fuels that work

Good smoker fuel is dry, slow-burning and produces cool, white smoke. Common choices:

  • Burlap: a classic, easy to light, steady burn. Use untreated burlap only.
  • Pine needles: readily available in many regions, aromatic, and burn well.
  • Cotton rags or twine: stable and slow, if natural fibre.
  • Wood shavings and untreated wood pellets: easy to find and burn cleanly.
  • Dried leaves and grass: a free option; keep dry.
  • Cardboard (plain, unprinted): works in emergencies.

Do not use treated materials, plastics, synthetic fibres, oily rags or anything with chemicals; the smoke can harm bees and contaminate honey and wax. Avoid fuels that burn hot or throw sparks. Test a new fuel in a small amount before relying on it.

Lighting and keeping it lit

  1. Start with a small fire. Light a bit of dry tinder, such as a few strips of newspaper or dry grass, and drop it into the firebox.
  2. Add fuel gradually. Puff the bellows gently, then add a layer of fuel on top.
  3. Pack loosely. Keep air flowing, then pack down slightly when the fire is established.
  4. Cool the smoke. The smoke should be white and cool to the touch. If it feels hot or yellow, add green grass or dampen the top layer.
  5. Keep it going. Puff regularly while you work, and add fuel before it dies.
  6. Do not overpack. A smoker that is too full is hard to light and burns inefficiently.

If your smoker keeps going out, the fuel is probably too damp or too tightly packed, or the nozzle is clogged with creosote. Scrape the inside regularly with a hive tool or wire brush.

Using smoke in the hive

Use three steps:

  • At the entrance: give one or two gentle puffs and wait a minute.
  • Under the lid: lift the cover slightly and puff before removing it.
  • Between frames: smoke the tops of frames lightly as you work.

Give the smoke a moment to take effect. Bees gorge on honey in a minute or two, and the colony becomes calmer. Avoid puffing directly at the queen or into open brood cells. In hot weather or in particularly defensive colonies, a bit more smoke may be needed, but heavy smoke should be a warning to examine your technique, your timing and the colony's condition. Rough weather or a queenless colony often explains aggressive behaviour; see Queenlessness: Signs and Timing.

Fire safety

Smokers cause burns and wildfires. Never put a lit smoker down on dry grass, on a wooden hive stand, or in a vehicle. Keep a bucket of water or a fire extinguisher close, especially in dry seasons.
  • Check local burn bans and fire danger levels before you light up; they can apply to smokers.
  • Never leave a lit smoker unattended.
  • Use a metal stand or hook, or set it on bare ground or a non-flammable surface.
  • Extinguish it by plugging the nozzle with a wad of green grass or a cork and letting it cool, or by soaking the fuel in water.
  • Transport it only when cold and sealed.
  • Youth beekeepers should use smokers under direct adult supervision, with clear rules about handling.
  • Wear long sleeves, closed shoes and gloves to protect against sparks and hot metal.

Maintenance

Clean out the firebox after each use, and scrape creosote from the nozzle. Check bellows for cracks and leaks, and replace them as needed. A bit of oil on the hinge keeps it moving. Store the smoker dry, and keep spare fuel in a sealed container to prevent damp. Painted or galvanised smokers will rust eventually; stainless is more durable. Rotate your fuels and note which burn best in your climate.

Alternatives and when not to smoke

Some beekeepers use a spray bottle with light sugar syrup or a mist of water to calm bees, particularly when working with sensitive tasks such as queen introduction. Smoke can disrupt queen pheromones and cause ill effects in certain situations, and it should not be used around extraction equipment or near honey you plan to sell. Learn to read bee behaviour, and use the smallest amount of smoke that works. See also Hive Tools: J-Hook, Auto-Rotate, and Standard and Bee Brushes: When and How to Use.

Troubleshooting common problems

Smoke is hot or sparks fly out. The fire is too fierce, so add a layer of green grass or damp fuel on top and puff less. Smoker goes cold in minutes. The firebox may be underfilled; start with a slightly larger base fire and top up. Soot and tar on frames. The nozzle is clogged, or you are holding the smoker too close; scrape the nozzle and keep a few inches of distance. Bees seem agitated by smoke. Too much, too hot, or the wrong time; wait a minute between puffs.

A reliable routine helps: light the smoker before you suit up, check it is producing cool smoke, and keep it upwind of the hive but handy. Refill before it is nearly out. Beginners often forget fuel in the truck, so keep a bag of dry fuel in your kit. After finishing, see Hive Tools: J-Hook, Auto-Rotate, and Standard to clean everything together.

FAQ

What is the best fuel for a smoker?

Untreated burlap, dry pine needles, wood shavings and natural-fibre rags all work well; choose a dry, slow-burning material that produces cool, white smoke.

Why does my smoker keep going out?

Common causes are damp fuel, too-tight packing, a clogged nozzle, or not puffing often enough, so use dry fuel, pack loosely and clean the nozzle.

Can smoke harm my bees or my honey?

Light, cool smoke does little harm, but excessive or hot smoke can irritate bees and flavour honey, so use small puffs and avoid treated or synthetic fuels.

Keep learning

Browse all 500 guides →