Beekeeping Directory

Home › Guides › Wild Bees, Pollinators & Conservation › Protecting Cavity-Nesting Bees

Wild Bees, Pollinators & Conservation

Protecting Cavity-Nesting Bees

Cavity-nesting bees use pre-existing hollows: beetle tunnels in dead wood, pithy or hollow plant stems, abandoned snail shells, and rock crevices. About a quarter to a third of native bee species nest this way, including mason bees, leafcutter bees, small carpenter bees, and resin bees. Their needs are simple but easily removed by tidy landscaping. This article explains which bees use cavities, what materials and conditions they need, how to protect natural nest sites, and how to support them with managed nests without creating disease problems.

Who Nests in Cavities

Common cavity nesters include:

  • Mason bees (Osmia): use hollow stems and beetle burrows, seal cells with mud, see Mason Bees: Spring Pollinators
  • Leafcutter bees (Megachile): line cells with cut leaves, see Leafcutter Bees: Summer Pollinators
  • Small carpenter bees (Ceratina): excavate pith of broken stems such as raspberry and sumac
  • Resin bees (Heriades, Dianthidium): build cells from plant resin and pebbles
  • Yellow-faced bees (Hylaeus): line cells with a cellophane-like secretion, in hollow stems
  • Large carpenter bees (Xylocopa): excavate tunnels in solid wood

Cavity nesters are diverse, and different species need different hole sizes, from less than 1/8 inch to over 1/2 inch. Many are small and unobtrusive, and they are easy to miss.

Their natural nest sites are often removed. Dead trees come down, brush piles are burned, and stems are cut, mowed, or chipped. Protecting those sites does more than a purchased nest block.

Natural Nest Sites to Keep

Leave:

  1. Standing dead wood: snags and stumps, where safe, with beetle holes and cracks
  2. Hollow and pithy stems: raspberry, elderberry, sumac, goldenrod, teasel, mullein, bamboo, and joe-pye weed, left standing 12 to 24 inches tall
  3. Brush piles and log stacks: in a quiet corner, loosely stacked
  4. Old fence posts and wooden structures: with insect holes, where not a hazard
  5. Rock walls and gaps: crevices used by some species

When cutting stems in spring, leave stubs. Many small bees nest in cut stems left upright, and the following year's brood emerges from the stub. Cut stems at different heights, with some left tall, others short. Do not burn or chip cut stems immediately. Pile them in an out-of-sight area for a season.

Dead wood safety matters. Remove trees that threaten buildings, trails, or roads, but leave stumps, and consider leaving a tall stump if it is safe.

Hole Size and Depth

Hole diameter determines which species use a nest, and each species lays eggs in a limited size range.

DiameterTypical users
3/32 to 1/8 inch (2 to 3 mm)Yellow-faced bees, tiny resin bees
1/8 to 3/16 inch (3 to 5 mm)Small carpenter bees, small leafcutters
1/4 to 5/16 inch (6 to 8 mm)Mason bees, many leafcutters
3/8 inch (9 to 10 mm)Larger leafcutters and mason bees

Depth should generally be 5 to 6 inches for larger species, with a closed back. Smooth, clean holes with no splinters protect wings. In natural nests, species use whatever size is available, so offering a range gives more choices.

Orientation matters. Nests facing south or southeast, exposed to morning sun and sheltered from rain, tend to be occupied most. Mount them at least three feet above ground and fix them securely to avoid swaying. See Nesting Blocks: Maintenance and Disease and Bee Hotels: Best Practices for design and maintenance.

Managing Artificial Nests Safely

Artificial nests concentrate bees and their natural enemies. Poorly designed or unmaintained nests can spread disease and parasites, making them more harmful than helpful. Guidelines:

  • Prefer nests with removable liners or trays that can be opened for cleaning
  • Replace or clean nest materials annually, discarding old tubes that show signs of mites or mold
  • Do not use bundles of tubes that cannot be opened
  • Protect nests from rain, and ensure ventilation
  • Install bird protection, such as wire mesh in front, where woodpeckers or wrens raid
  • Offer several small nests spread out, rather than one big one
  • Avoid painting or treating wood with preservatives or pesticides

Parasites are part of the system, so a few infested cells are not a crisis. But signs of heavy infestation, such as many dead brood, fuzzy mold, or lots of pollen mites, call for action. See Nesting Blocks: Maintenance and Disease for disease details.

Plants and Surroundings

Cavity nesters need flowers within a short flight, usually a few hundred feet. Provide diverse bloom across the season, adjusting to the flight time of the bees you host, see Pollinator Gardens: Design Principles and Native Plants for Bees by Region. Leaf-cutting bees need leaves of roses, redbud, and other plants for cell material, and mason bees need mud. Do not remove all leaf-bearing plants or muddy margins.

Avoid pesticides near nests, especially systemic insecticides and sprays on flowering plants. Leafcutters carry leaf material into the nest, and mason bees use mud that may contain residues, so exposure can be more direct than for other bees. See Pesticide Impacts on Native Bees.

Provide water through shallow dishes and damp soil patches. Keep paths for bees clear, avoiding dense vegetation immediately in front of nests.

Common Mistakes

  • Using narrow bundles of paper straws that cannot be opened or cleaned
  • Mounting nests on shaded walls, in deep shade, or facing north
  • Hanging nests in wind without securing them
  • Ignoring hole size, so that few species can use the nest
  • Leaving old tubes for years, building up mites and fungus
  • Using treated lumber or fresh paint, which may be toxic
  • Removing all dead wood and stems in the name of tidiness
  • Expecting a nest to attract bees if there are no flowers nearby

A good approach is to start with natural resources, then add a small, well-designed, maintained nest if you want to observe bees up close. Consider documenting species and sharing records, see iNaturalist and Bee Identification and Photographing Bees: Tips and Ethics.

Conservation at Larger Scales

Parks, farms, and utilities can protect cavity nesters by maintaining standing deadwood, leaving hedgerow stems and brush, and scheduling mowing and pruning outside nesting seasons. Hedgerows and field edges retain stems and woody debris, see Hedgerows and Field Borders. Orchard growers can place nests near trees, see Apple and Cherry Pollination.

Community projects can map nest sites, share cleaning days, and compile records. For education, cavity nests provide a window into bee life, see Teaching About Pollinators: Resources and Community Pollinator Projects.

FAQ

Is it better to buy a bee hotel or leave dead stems?

Natural dead wood and hollow stems come first because they are free, diverse, and low risk. A well-designed, cleanable nest is an optional addition.

What size holes should I drill?

A mix of diameters from about 3/32 to 3/8 inch supports different species, with 5/16 inch holes being most commonly used by mason bees. Keep holes smooth and 5 to 6 inches deep for larger species.

Do cavity-nesting bees need cleaning each year?

Managed nests do. Use removable liners or trays and replace or clean them annually to reduce mites, mold, and parasites.

Keep learning

Browse all 500 guides →